User manual PANASONIC PT-AE1000E

[. . . ] CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for power supplies up to 125 V, 7 A. If you need to use higher voltages or currents than this, you will need to obtain a separate 250 V power cord. If you use the accessory cord in such situations, fire may result. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: This equipment is equipped with a three-pin grounding-type power plug. Do not remove the grounding pin on the power plug. [. . . ] To escape from the light-on mode, press the LIGHT button. Switching the picture mode You can switch the preset settings by pressing the THEATER ROOM, LIVING ROOM and FAVORITE buttons. See "PICTURE MODE" on page 28. Switching off the projector automatically You can switch off the POWER automatically by setting the SLEEP feature. Press the SLEEP button several times to cycle through the duration of time. FG FG I I I 240MIN. H210MIN. H180MIN. H150MIN. I H I H CINEMA1 FG I H I H I H CINEMA2 FG NATURAL NORMAL FG VIDEO DYNAMIC FG VIVID CINEMA Display the FAVOURITE LOAD menu. See "FAVOURITE LOAD" on page 30. ENGLISH - 23 Basic Operation 4:3 Turning on the button backlight Remote control operation Adjusting the image You can display one of the PICTURE or ADVANCED menu items by pressing the PICTURE ADJUSTMENT button. Press the button to switch between PICTURE and ADVANCED menu. Press F G to select the required menu item and I H to adjust. Create a new profile Adjusting the selected color Select a color and adjust COLOR, TINT and BRIGHTNESS. 1. Select the CURSOR menu and press ENTER. The projected image is captured, and the target cursor is displayed. When the LOG is fully stored, the target cursor will not be displayed. See "Managing stored logs" on page 25. The PROFILE setting will be set to NORMAL. NOTE: LOG and PROFILE SAVE are not displayed before you apply COLOR MANAGEMENT. If you load a profile with a different attribute mode of the profile, the CURSOR and PROFILE SAVE menus will not be displayed. The approximate colors will be adjusted at the same time. If you adjust the exact same color differently, both colors will affect each other and you might get unexpected results. White, Black and Grey are not adjustable. If you escape the COLOR MANAGEMENT menu or attempt to perform another menu action before you save the adjusted profile, the confirmation screen will be displayed. If you switch the input signal before you save the profile, the setting will be cancelled without notice. Saving a log setting as a profile Return to the COLOR MANAGEMENT menu and save the stored log as a profile. Make sure that the PICTURE MODE is not switched. ENGLISH - 25 Basic Operation 5. Press MENU or RETURN to return to the previous menu. Menu Navigation The menu system allows you to access functions which do not have their own dedicated buttons on the Remote control. The menu options are structured and categorized. You can navigate through the menu with F G I H buttons. [. . . ] 42 Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 MENU Button on the projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Opening the menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Remote control button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 SHARPNESS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Shift lens Image positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]