User manual PANASONIC PT-AE1000U

[. . . ] LCD Projector Operating Instructions Model No. PT-AE1000U For assistance, please call: 1 - 888 - View - PTV (843 - 9788) or send e-mail to: consumerproducts@panasonic. com or visit us at www. panasonic. com (U. S. A. ) For assistance, please call: 787 - 750 - 4300 or visit us at http://panasonic. net (Puerto Rico) Before operating this product, please read these instructions carefully and save this manual for future use. TQBJ0205 ENGLISH Important Safety Notice Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required. Model number: Serial number: PT-AE1000U WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Power Supply: This LCD Projector is designed to operate on 100 V - 240 V, 50 Hz/ 60 Hz AC, house current only. [. . . ] When the LOG is fully stored, the target cursor will not be displayed. See "Managing stored logs" on page 26. Target cursor Basic Operation Adjust the vividness of the color. Setting range: -30 to +30 Adjust the color tone. TINT Setting range: -30 to +30 Adjust the brightness of the color. BRIGHTNESS Setting range: -20 to +20 COLOR 4. Press ENTER to store the adjusted result. "PROCESSING" is displayed for a few seconds and the result is stored in LOG. You can store up to 8 logs under LOG for each PICTURE MODE setting. 5. Press MENU or RETURN to return to the previous menu. Repeat the steps above to store more adjustment. 2. Move the cursor with F G I H to the required place to select a color and press ENTER. The color at the center of the target cursor is sampled and the sample box is displayed on the left of the cursor. The menu items are displayed on the upper part of the screen. CURSOR RETURN SELECT ENTER DEFAULT COLOR TINT BRIGHTNESS Sampled color 26 - ENGLISH Remote control operation Managing stored logs You can edit or delete the stored logs of the selected PICTURE MODE. Loading saved profiles When profiles are loaded under the PICTURE MODE setting, you can keep them as you defined until the PROFILE is set to NORMAL. 1. Select LOG and press ENTER. The LOG menu is displayed. PICTURE MODE : CINEMA1 1. Select the required PICTURE MODE and press ENTER. Press the COLOR MANAGEMENT button and select the PROFILE menu. The profile settings of the selected PICTURE MODE will be displayed. POINT1 POINT2 POINT3 POINT4 POINT5 POINT6 POINT7 POINT8 ALL DELETE 3. Select the required profile and press ENTER. NORMAL Adjusted color USER1 USER3 NOTE: LOG and PROFILE SAVE are not displayed before you apply COLOR MANAGEMENT. If you load a profile with a different attribute mode of the profile, the CURSOR and PROFILE SAVE menus will not be displayed. The approximate colors will be adjusted at the same time. If you adjust the exact same color differently, both colors will affect each other and you might get unexpected results. White, Black and Grey are not adjustable. If you escape the COLOR MANAGEMENT menu or attempt to perform another menu action before you save the adjusted profile, the confirmation screen will be displayed. If you switch the input signal before you save the profile, the setting will be cancelled without notice. Return to the default setting of the PICTURE MODE Defined profile settings. Sampled color Select CHANGE to edit the log. [. . . ] 48 Cable specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Communication settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Control commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]