User manual PANASONIC PT-AE100E

[. . . ] R LCD Projector INPUT MUTE ASPECT VOLUME Operating Instructions Model No. R MENU ENTER NORMAL DIGITAL ZOOM F PROJECTOR PT-AE100E Before operating this product, please read the instructions carefully and save this manual for future use. TQBJ 0096 ENGLISH Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most performance out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its back. You should note it in the space provided below and retain this booklet in case service is required. [. . . ] The input signal selected will change as shown at below-right each time an input select button is pressed. STANDBY(R) ON(G) INPUT ASPECT LAMP TEMP VOLUME MUTE POWER INPUT KEYSTONE VOLUM MENU ENTER F DIGITAL ZOOM YPBPR S-VIDEO VIDEO PC 22-ENGLISH ENGLISH-23 Basic Operation On-screen menus Menu screens The various settings and adjustments for this projector can be carried out by selecting the operations from on-screen menus. The general arrangement of these menus is shown below. MAIN MENU Keystone correction (page 29) PICTURE menu (page 34) When an S-VIDEO/VIDEO signal is being input PICTURE PICTURE MODE NORMAL COLOR 0 TINT 0 BRIGHT 0 CONTRAST 0 SHARPNESS 0 COLOR TEMP. NORMAL TV-SYSTEM AUTO1 SELCT ADJ ESC When a YPBPR signal is being input PICTURE PICTURE MODE NORMAL COLOR 0 TINT 0 BRIGHT 0 CONTRAST 0 SHARPNESS 0 COLOR TEMP. NORMAL SIGNAL MODE 525I SELCT ADJ ESC SHUTTER function (page 33) OPTION menu (page 37) OPTION OSD ON PC PRIORITY NORMAL BACK COLOR BLACK 4:3 H-POS CENTER FRONT/REAR FRONT DESK/CEILING DESK LAMP POWER HIGH LAMP RUNTIME 5H FUNCTION INDEX SELCT ADJ ESC PICTURE PICTURE MODE NORMAL BRIGHT 0 CONTRAST 0 SHARPNESS 0 COLOR TEMP. NORMAL W-BAL R 0 W-BAL G 0 W-BAL B 0 SIGNAL MODE SVGA SELCT ADJ ESC POSITION menu (page 36) When an S-VIDEO/VIDEO/ YPBPR signal is being input POSITION H-POSI V-POSI ASPECT SELCT 0 0 16:9 ENTER ESC When a PC signal is being input POSITION H-POSI 0 V-POSI 0 DOT CLK 0 CLK PHASE 0 ASPECT 4:3 AUTO SETUP SELCT ENTER ESC LANGUAGE menu (page 33) NOTE: B The remote control unit must be used to manipulate on-screen menus. B Keystone distortion of the onscreen display will not be corrected. LANGUAGE ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO SELCT ENTER ENGLISH ESC 24-ENGLISH ENGLISH-25 Basic Operation MENU KEYSTONE PICTURE POSITION SHUTTER LANGUAGE OPTION SELCT ENTER When a PC signal is being input Menu operation guide # Press the MENU button. The MAIN MENU screen will be displayed. $ Press the F or G arrow buttons to select an item. Selected items will be displayed in blue. Unavailable on-screen menu items This projector has unadjustable items and unusable functions depending on the signal being input. When an item cannot be adjusted or a function cannot be used, the corresponding on-screen menu display does not appear, and the item or function will not work even if the ENTER button is pressed. MENU KEYSTONE PICTURE POSITION SHUTTER LANGUAGE OPTION SELCT ENTER % Press the ENTER button to accept the selection. The selected menu screen or adjustment screen will then be displayed. (Example: PICTURE menu) PICTURE PICTURE MODE NORMAL COLOR 0 TINT 0 BRIGHT 0 CONTRAST 0 SHARPNESS 0 COLOR TEMP. NORMAL TV-SYSTEM AUTO1 SELCT ADJ ESC All items displayed will be returned to their factory default settings, and the bar scale will appear white. Returning to the previous screen If you press the MENU button while a menu screen is being displayed, the display will return to the previous screen. If you press the MENU button while the MAIN MENU screen is being displayed, the MAIN MENU screen will be cleared. Indicates the current adjustment value B The positions of triangle symbols vary depending on the type of signal being input. Using the freeze function The picture will alternate between a still picture and a moving picture each time the F(function) button on the remote control unit is pressed. Select FREEZE from the FUNCTION item in the OPTION menu to use this function. (Refer to page 38. ) Still picture Moving picture 26-ENGLISH ENGLISH-27 Basic Operation MENU KEYSTONE PICTURE POSITION SHUTTER LANGUAGE OPTION SELCT ENTER & Press the F or G buttons to select an item, and then press the I or H buttons to change or adjust the setting. An individual adjustment screen such as the one shown below will be displayed for bar-scale items. BRIGHT 0 Returning a setting to the factory default If you press the NORMAL button on the remote control unit, you can return settings to the factory default settings. However, the operation of this function varies depending on which screen is being displayed. B When a menu screen is being displayed PICTURE PICTURE MODE NORMAL COLOR 0 TINT 0 BRIGHT 0 CONTRAST 0 SHARPNESS 0 COLOR TEMP. NORMAL TV-SYSTEM AUTO1 SELCT ADJ ESC B When an individual adjustment screen is being displayed BRIGHT 0 The bar scale will turn green when any adjustment changes the setting from the factory set value. Only the item displayed will be returned to the factory default setting, and the bar scale will appear white. NOTE: B Triangle symbols above and below a menu bar indicate the factory default setting. Items which do not have these triangle symbols cannot be returned to the factory default setting. [. . . ] (Refer to page 17. ) B The remote control unit may be out of the operation range. (Refer to page 17. ) The picture does not B The correct input signal may not be selected. (Refer to page 22. ) B The signal format (TV system) may not be set correctly. (Refer to page 35. ) B There may be a problem with the video tape or other signal source. [. . . ]