User manual PANASONIC PT-AE900U

[. . . ] R LCD Projector Operating Instructions Model No. PT-AE900U Before operating this product, please read the instructions carefully and save this manual for future use. For assistance, please call : 1-888-View-PTV(843-9788) or send e-mail to : consumerproducts@panasonic. com or visit us at www. panasonic. com (U. S. A) For assistance, please call : 787-750-4300 or visit us at www. panasonic. co. jp/global/ (Puerto Rico) TQBJ 0182 ENGLISH Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required. [. . . ] B To return to normal operating mode, press any button on either the projector or remote control unit except the LIGHT button and the buttons to operate the selected device on the remote control unit. (Refer to page 17 for details. ) Displaying the "ADVANCED MENU" (ADVANCED) Press the ADVANCED button. BThe individual adjustment screen will be displayed as shown above. Press the F or G button to switch the item. BPress the I or H button to adjust the value. BYou can adjust "ADVANCED MENU" items with the bar scale only. BThe screen display will be cleared when the MENU button or the RETURN button is pressed, or when no operation is carried out for 3 seconds. BRefer to page 46 for details on the "ADVANCED MENU". 34-ENGLISH ENGLISH-35 Useful functions BThe individual adjustment screen will be displayed as shown above. Press the F or G button to switch the item. BPress the I or H button to adjust the value or change the setting. BYou can adjust "PICTURE" menu items using selective settings or the bar scale only. BThe screen display will be cleared when the MENU button or the RETURN button is pressed, or when no operation is carried out for 3 seconds. BRefer to page 44 for details on the "PICTURE" menu. Using the Cinema Color Management function(C. C. M) You can adjust, save, and retrieve the settings for the selected colors of the projected image based on the selected picture mode to suit your preference. Press the F or G button to select an item, press the I or H button to change the settings, and press the ENTER button for confirmation. Press the C. C. M button. CURSOR You can select a color in the projected image, and adjust the color settings. Press the ENTER button to display the cursor (B). # Select the color you want to adjust with the cursor. B Press the F, G, I and H buttons to move the cursor, and then press the ENTER button. B The selected color (C) and the "CURSOR" menu (A) will be displayed. $ Adjust the items in the "CURSOR" menu. B The color adjusted in the "CURSOR" menu (D) will be displayed. COLOR Adjusts the deepness of the color. BRIGHT Adjusts the brightness of the color. [. . . ] Operation will be switched between ON and OFF each time the command is sent. Do not switch operation ON and OFF after only short periods of time. The picture being projected will be paused. Parameter 0=OFF 1=ON The menu screen will be displayed. [. . . ]