User manual PANASONIC PT-AX100U

[. . . ] LCD Projector Operating Instructions Model No. PT-AX100U For assistance, please call: 1 - 888 - View - PTV (843 - 9788) or send e - mail to: consumerproducts@panasonic. com or visit us at www. panasonic. com For assistance, please call: 787 - 750 - 4300 or visit us at http://panasonic. net (U. S. A) (Puerto Rico) Before operating this product, please read these instructions carefully and save this manual for future use. TQBJ0203 ENGLISH Important Safety Notice Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required. Model number: Serial number: PT-AX100U WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Power Supply: This LCD Projector is designed to operate on 100 V - 240 V, 50 Hz/ 60 Hz AC, house current only. [. . . ] Target cursor PICTURE menu items PICTURE MODE, CONTRAST, BRIGHTNESS, COLOR, TINT, SHARPNESS, COLOR TEMPERATURE and DYNAMIC IRIS ADVANCED menu items GAMMA, CONTRAST, BRIGHTNESS, COLOR MANAGEMENT, NR, MPEG NR, CINEMA REALITY and TV-SYSTEM NOTE: For each menu items description, see "Menu Navigation" on page 26. The screen will be cleared after 7 seconds without any operation. Basic Operation 2. Move the cursor with F G I and H to the required place to select a color and press ENTER. The color at the center of the target cursor is sampled and the sample box is displayed on the left of the cursor. The menu items are displayed on the upper part of the screen. CURSOR RETURN SELECT ENTER DEFAULT COLOR TINT BRIGHTNESS Setting your own color profile You can adjust a selected color individually and save and retrieve under the PICTURE MODE setting. Press the COLOR MANAGEMENT button to open the menu. Sampled color PROFILE CURSOR LOG PROFILE SAVE NORMAL 3. Select a menu item and the I H to adjust each item level. The result box is displayed on the right of the cursor and shows the adjusted color. CURSOR RETURN SELECT ENTER DEFAULT COLOR TINT BRIGHTNESS Adjusted color 24 - ENGLISH Remote control operation Adjust the vividness of the color. Setting range: -30 to +30 Default: 0 Adjust the color tone. Setting range: -30 to +30 Default: 0 Adjust the brightness of the color. Setting range: -20 to +20 Default: 0 COLOR 1. Select the PROFILE SAVE menu and press ENTER The PROFILE SAVE menu is displayed. You can save the profile as USER1, USER2 and USER3. USER1 USER2 USER3 TINT BRIGHTNES S 2. Press ENTER to save the profile The confirmation screen is displayed. Press ENTER to store the adjusted result. "PROCESSING" is displayed for a few seconds and the result is stored in LOG. You can store up to 8 logs under LOG for each PICTURE MODE setting. Loading saved profiles When profiles are loaded under the PICTURE MODE setting, you can keep them as you defined until the PROFILE is set to NORMAL. Repeat the steps above to store more adjustment. 1. Select the required PICTURE MODE and press ENTER. Press the COLOR MANAGEMENT button and select the PROFILE menu. The profile settings of the selected PICTURE MODE will be displayed. Managing stored logs You can edit or delete the stored logs of the selected PICTURE MODE. 1. Select LOG and press ENTER. The LOG menu is displayed. PICTURE MODE : CINEMA1 3. Select the required profile and press ENTER. NORMAL USER1 Return to the default setting of the PICTURE MODE Defined profile settings. POINT1 POINT2 POINT3 POINT4 POINT5 POINT6 POINT7 POINT8 ALL DELETE USER2 USER3 Sampled color Adjusted color 2. Select the required log from 1 - 8 or ALL DELETE, and press ENTER. Select CHANGE to edit the log. The cursor menu is displayed and you can readjust the color. The confirmation screen will be displayed. When you select ALL DELETE, the "DELETE ALL LOG. " screen is displayed. [. . . ] 16 MPEG NR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 N NR (Noise Reduction) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 O OPTION Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Sub-menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Shift lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 SIGNAL MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 SLEEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Remote control button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]