User manual PANASONIC PT-AX200

[. . . ] You should note it in the space provided below and retain this booklet in case service is required. Important Information Model number: Serial number: WARNING: WARNING: PT-AX200 THIS APPARATUS MUST BE EARTHED. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time. [. . . ] See "TEST PATTERN" on page 39. Adjust the angle of the projector. Screw down the front leg adjusters and adjust the angle vertically. See "Front leg adjusters and throwing angle" on page 15. · Do not touch the air exhaust port as this may cause burns or injury. · If keystone distortion occurs, see "KEYSTONE" on page 36. · If you adjust the focus, you may need to adjust the size of the image again. ENGLISH - 21 Basic Operation NOTE: Remote control operation Operating range You can operate the projector with the remote control within the remote range 7 m (22'11"). Facing to the projector Ensure the remote control emitter is facing to the remote control signal receptor on front/back of the projector and press the required buttons to operate. Facing to the screen Ensure the remote control emitter is facing to the screen and press the required buttons to operate the projector. The signal will be reflected off the screen. The operating range may differ due to the screen material. This function may not be effective with a translucent screen. NOTE: · Do not let strong light shine onto the signal receptor. The remote control may malfunction under strong light such as fluorescent. · If there are any obstacles between the remote control and the remote control signal receptor, the remote control may not operate correctly. Basic Operation Turning on the button backlight In a dark room, you can turn on the button backlight to operate the remote control. Press the LIGHT button on the upper right corner of the unit to turn on the backlight and enter the light-on mode. When the LOG is fully stored, the target cursor will not be displayed. See "Managing stored logs" on page 24. Target cursor Adjusted colour Adjust the vividness of the colour. Setting range: -30 to +30 Adjust the colour tone. TINT Setting range: -30 to +30 Adjust the brightness of the colour. BRIGHTNESS Setting range: -20 to +20 COLOUR Basic Operation 4. Press ENTER to store the adjusted result. "PROCESSING" is displayed for a few seconds and the result is stored in LOG. You can store up to 8 logs under LOG for each PICTURE MODE setting. 2. Move the cursor with F G I H to the required place to select a colour and press ENTER. The colour at the centre of the target cursor is sampled and the sample box is displayed on the left of the cursor. The menu items are displayed on the upper part of the screen. CURSOR RETURN SELECT ENTER DEFAULT COLOUR TINT BRIGHTNESS 5. Press MENU or RETURN to return to the previous menu. Repeat the steps above to store more adjustment. Managing stored logs You can edit or delete the stored logs of the selected PICTURE MODE. [. . . ] 47 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Control commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Inquiry commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Pin assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]