User manual PANASONIC PT-D995U

[. . . ] Operating Instructions PROJECTOR Model No. PT-D995U Operating Instructions 1-60 Read these instructions completely before operating this unit. TQBJ0026 Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most performance out of your new product, and that you will be pleased with your Panasonic D-ILA projector. The serial number of your product may be found on its back. [. . . ] In this case, menu clearing in the above order is not available. The selection changes from AUDIOVOL to TRACKING directly. Description of adjustment and setting items TRACKING : If wide vertical stripes appear on the screen, adjust the lateral video size and display area 0 +255) so that they disappear. (-255 PHASE : If characters on the screen flicker or become dim, adjust so they become clear. : If the screen position is displaced to the right or left, adjust the horizontal position of the 0 +255) screen. : If the screen position is displaced upward or downward, adjust the vertical position of the +120) screen. (-120 0 FOCUS : Adjust the focus of video picture. ZOOM : Adjust the screen size (angle of view). (0 50) Adjust and set the selected item using the QUICK ALIGN. buttons + or - . To adjust and set multiple items, repeat steps 2 and 3. To reset the adjustment value of the selected item (TRACKING, PHASE, H. POS. ) to the factory-set value, press the remote control's PRESET button. This button does not work for focus, zoom or sound volume. To adjust and set items using the remote control unit: Items can be adjusted and set using the cursor buttons or remote control unit. on the Clear the setting menu by pressing the SETTING button repeatedly. To clear the setting menu using the remote control unit: You can also clear the setting menu by pressing the PAGE BACK button on the remote control unit. Using the quick alignment function: This function works only for computer-related signals inputted. Press the remote control's QUICK ALIGN. button, or after clearing the menu displayed, press the projector's QUICK ALIGN. buttons "+ " and "" at the same time. During the adjustment, "QUICK ALIGNMENT" appears on the screen, and disappears after the adjustment finishes. 33 Operating the Main Menu Configuration the Main Menu (AV Input) The menus are configured as follows: Main menu (AV inputs : During AV IN input signal) PIXEL CLOCK TRACKING PHASE POSITION V. PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR TINT ALL RESET SOUND TREBLE BASS OPTIONS MENU AUTO OFF LINE DISPLAY RIGHT LEFT REV. CLAMP Normally, no adjustment is required. The lateral size and display area of video image are adjusted. Flickering or dim video image is adjusted. The vertical position of the video image being projected is adjusted. The horizontal position of the video image being projected is adjusted. [. . . ] Is the distance too long? 31 16 16 20 Use the remote control unit at a nearer point. 20 * This projector is equipped with a microcomputer that may operate abnormally due to interference from external components. If this happens, turn off the main power and disconnect the power cord from the wall AC outlet. Then reconnect the power cord to AC outlet and turn on the main power again. (For the turning on and off the power, see pages 27 to 28. ) Maintenance Stains on the cabinet Should be wiped off with a soft cloth. [. . . ]