User manual PANASONIC PT-L6600U

[. . . ] Model number: PT-L6600U Serial number: IMPORTANT SAFETY NOTICE WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Power Supply: This LCD Projector is designed to operate on 100 V ­ 240 V, 50 Hz/60 Hz AC, house current only. CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for power supplies up to 125 V, 7 A. If you need to use higher voltages or currents than this, you will need to obtain a separate 250 V power cord. [. . . ] (This setting is only for signals which have lower resolutions than the LCD panels. Refer to page 70 for details. ) ON The pixel resolution of the input signal is converted to the same resolution as the LCD panels before being projected. For signals with lower resolutions, gaps in the pixels are automatically interpolated into the picture before it is projected. This may sometimes cause problems with the quality of the picture. OFF The input signal is projected at its original resolution, with no pixel conversion. The projected picture will be smaller than normal, so adjust the zoom setting or move the projector forwards or backwards to adjust the picture size if necessary. If set to "OFF", some features, such as "D. ZOOM" (digital zoom) or "KEYSTONE" will not function. AUTO SETUP This item functions in the same way as the AUTO SETUP button on the remote control unit and the projector control panel. (page 28) FRAME LOCK If the picture's condition is bad while a RGB moving picture is projected, set "FRAME LOCK" to "ON". Refer to page 70 for compatible RGB signals. ENGLISH-45 Adjustments and settings Audio adjustment Press the F or G button on the projector or remote control unit to select an item. AUDIO VOLUME MUTE 20 OFF VOLUME MUTE Press the I or H button to adjust the volume of the sound output. Set to "ON" pressing the I or H button to turn off the volume of the sound output. To cancel muting, set to "OFF". ON SELECT:[^][@] ADJUST:[{][}] ENTER:[ENTER] ESC:[MENU] Changing the display language Press the F, G, I and H buttons on the projector or remote control unit to select a language, then press the ENTER button to accept the setting. LANGUAGE ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO SELECT:[^][@][{][}] SELECT:[{][}] ESC:[MENU] ENTER:[ENTER] 46-ENGLISH Option settings Press the F or G button on the projector or remote control unit to select an item, then press the I or H button to change the setting. OPTION OSD AUTO SEARCH AUTO SIGNAL RGB2 SELECT RGB/YPBPR VGA60/480p BACK COLOR CINEMA REALITY NEXT PAGE @ SELECT:[^][@] ADJUST:[{][}] OFF OFF OFF INPUT RGB VGA60 BLUE OFF ON ON ON OUTPUT YPBPR 480p BLACK ON AUTO SEARCH ON The input signal will be detected and selected automatically when the input select (RGB, VIDEO) buttons are pressed for a few seconds. (page 43) SET ID This item is used to set the projector ID number to control two or more projectors either simultaneously or separately. ALL 1 64 ALL The projectors can be controlled from any remote control unit regardless of their ID numbers. 1-64 The projector can be controlled from the remote control unit with the same ID number. NOTE: B "SET ID" is set to "ALL" by default. Hence ID number need not be set when only one projector is used. B If the projectors are given ID numbers, their remote control units must be assigned the same ID numbers, respectively. B When several projectors are set up together and "SET ID" is set to "ALL", none of the projectors can be operated separately from other projectors, even if they have been set with different ID numbers. B The projector cannot be turned on and off from the remote control unit if the "CONTROLLER ID" does not match the projector ID number. For details on setting the projector ID number in the remote control unit, refer to page 23. CONTROL KEY To disable the buttons on the projector, set "CONTROL KEY" to "OFF". A confirmation screen will then be displayed. Select "OK" by pressing the I or H button. To use the buttons on the projector, set to "ON" by using the remote control unit. AUTO POWER OFF If no signal is input to the projector for the duration of the period you set, the projector will return to standby mode. [. . . ] Si "PUIS. LAMPE" est réglée sur "FROIDE", la durée de vie de la lampe peut être allongée. B Bien que le délai de 1 500 heures soit l'intervalle de remplacement prévu, l'obtention de cette durée n'est pas couverte par la garantie. Notes sur le remplacement du bloc de lampe B La lampe produisant la lumière est en verre; il ne faut donc pas la laisser tomber ou la cogner contre des objets rigides, car elle risquerait d'éclater. Faire bien attention lorsqu'on manipule la lampe. B Jeter la lampe usagée de la même manière qu'une lampe fluorescente. [. . . ]