User manual PANASONIC PT-L701U

[. . . ] Model number: PT-L701U / PT-L735U Serial number: IMPORTANT SAFETY NOTICE WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Power Supply: This LCD Projector is designed to operate on 100 V ­ 240 V, 50 Hz/60 Hz AC, house current only. CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for power supplies up to 125 V, 7 A. If you need to use higher voltages or currents than this, you will need to obtain a separate 250 V power cord. [. . . ] B If the type of signal being input changes while the digital zoom function is being used, the digital zoom function will be cancelled. Adjusting the volume (VOLUME) FREEZE SHUTTER Press the VOLUME +/- button. B Press the + button to raise the volume. B Press the - button to lower the volume. NOTE: B You can also select "VOLUME" from the AUDIO menu to adjust the volume. FUNC1 STD Computer Projector ENGLISH-29 Useful functions Useful functions of the remote control unit Laser beam pointer The laser beam emitted from the remote control can be used as a pointer by pointing forward to the screen. While the LASER button is being pressed, the laser beam is being emitted and the operating indicator illuminates. Do not look into the laser emitter of the remote control unit or point the laser beam towards other people, otherwise damage to eyes may occur. Warning B DO NOT STARE INTO THE LASER BEAM OR AIM IT AT ANY PERSON'S EYE. LASER RADIATION CAN CAUSE SERIOUS INJURY TO THE HUMAN EYE. Laser Transmitter window POWER AUTO SETUP RGB VIDEO LASER MENU PAGE R-CLICK ENTER PUSH FREEZE SHUTTER FUNC1 STD Computer Projector Caution B Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. B This remote control unit cannot be repaired. 30-ENGLISH Wireless mouse You can use the remote control as a personal computer mouse. Set the Mode (Projector/Computer) switch on the remote control unit to "Computer" and connect the projector's USB port to a personal computer counterpart with the accessory USB cable. Projector Accessory USB cable Computer equipped with a USB port BFor Windows (Versions 98SE, Me, 2000 and XP), you can use the standard mouse driver which comes bundled with the operating system. Mode switch (Computer/Projector) RGB VIDEO LASER MENU PAGE Page buttons FGIH button R-CLICK ENTER R-CLICK button FREEZE SHUTTER FUNC1 STD Computer Projector Mode switch (Computer/Projector) Click button NOTE: B The optional wireless mouse receiver (ET-RMRC2) is needed when the projector and personal computers are placed where they cannot be connected with the accessory USB cable. ENGLISH-31 Useful functions POWER AUTO SETUP Move the mode switch to the "Computer" position. B Page buttons ^: Functions as the Page Up button on a personal computer keyboard. B For the selective items RESIZING OFF ON All items displayed will be returned to their factory default settings. NOTE: B You can also select STANDARD from the menu screen and then press the ENTER button. B When an individual adjustment screen is being displayed DOT CLOCK 32 Select the setting by pressing the I or H buttons. C For the fixed items Press the ENTER button, and the function will work. Only the item displayed will be returned to the factory default setting. 36-ENGLISH Adjusting the picture Select the item pressing the F or G buttons on the remote control unit or the projector. Press the I or H buttons to set the selective items. For the value adjusting items, press the ENTER button to display an individual screen, and press the I or H buttons to adjust the setting. When an RGB signal is being input PICTURE PICTURE MODE CONTRAST BRIGHT SHARPNESS COLOR TEMP. WHITE BALANCE R WHITE BALANCE G WHITE BALANCE B STANDARD When an S-VIDEO/VIDEO signal is being input PICTURE PICTURE MODE CONTRAST BRIGHT COLOR TINT SHARPNESS COLOR TEMP. NR TV-SYSTEM STANDARD STANDARD 32 32 32 32 6 STANDARD 0 AUTO1 SELECT:[^][@] ADJUST:[{][}] ENTER:[ENTER] ESC:[MENU] When the NETWORK/SD CARD is selected STANDARD 32 32 6 STANDARD 32 32 32 PICTURE PICTURE MODE CONTRAST BRIGHT SHARPNESS COLOR TEMP. STANDARD STANDARD 32 32 6 STANDARD SELECT:[^][@] ADJUST:[{][}] ENTER:[ENTER] ESC:[MENU] SELECT:[^][@] ADJUST:[{][}] ENTER:[ENTER] ESC:[MENU] When a YPBPR signal is being input PICTURE PICTURE MODE CONTRAST BRIGHT COLOR TINT SHARPNESS COLOR TEMP. NR STANDARD PICTURE MODE STANDARD 32 32 32 32 6 STANDARD 0 NATURAL STANDARD DYNAMIC BLACKBOARD Select the picture mode that best matches the image source and room conditions. The mode best used in dark rooms is NATURAL. [. . . ] 7 m (23´) (when operated directly in front of signal receptor) Weight: 108 g (3. 8 ozs. ) (including batteries) Dimensions: Width: 33 mm (1-9/32) Length: 168 mm (6-19/32) Height: 40 mm (1-9/16) <Options> Ceiling bracket ET-PK735 Wireless mouse receiver ET-RMRC2 Wide conversion lens ET-LEC701 Wireless card ET-CDWL2U During RGB input/output: R. G. B. : G. SYNC: HD/SYNC: ENGLISH-61 Others Appendix List of compatible signals Mode NTSC/NTSC4. 43/ PAL-M/PAL60 PAL/PAL-N/SECAM 525i 625i 525p HDTV60 HDTV50 750P VESA70 VESA85 VGA60 *4 VGA65 VGA72 VGA75 VGA85 SVGA55 SVGA60 *4 SVGA70 SVGA75 SVGA85 MAC16 XGA60 *4 XGA70 XGA75 XGA85 XGA85i MXGA70 MXGA75 MXGA85 MAC21 MSXGA60 *4 SXGA60 *4 SXGA75 SXGA85 SXGA60+ *4 UXGA60 *4 Display resolution (dots)*1 720 x 480i 720 x 576i 720 x 480i 720 x 576i 720 x 483 1 920 x 1 080i 1 920 x 1 080i 1 280 x 720 640 x 400 640 x 400 640 x 480 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1 024 x 768 1 024 x 768 1 024 x 768 1 024 x 768 1 024 x 768i 1 152 x 864 1 152 x 864 1 152 x 864 1 152 x 870 1 280 x 960 1 280 x 1 024 1 280 x 1 024 1 280 x 1 024 1 400 x 1 050 1 600 x 1 200 Scanning frequency H V (kHz) (Hz) 15. 734 15. 625 15. 734 15. 625 31. 469 33. 750 28. 125 45. 000 31. 469 37. 861 31. 469 35. 000 37. 861 37. 500 43. 269 35. 156 37. 879 48. 077 46. 875 53. 674 49. 725 48. 363 56. 476 60. 023 68. 678 35. 520 63. 995 67. 500 76. 705 68. 681 60. 000 63. 981 79. 977 91. 146 63. 981 75. 000 59. 940 50. 000 59. 940 50. 000 59. 940 60. 000 50. 000 60. 000 70. 086 85. 081 59. 940 66. 667 72. 809 75. 000 85. 008 56. 250 60. 317 72. 188 75. 000 85. 061 74. 550 60. 004 70. 069 75. 029 84. 997 86. 952 71. 184 74. 917 85. 038 75. 062 60. 000 60. 020 75. 025 85. 024 60. 020 60. 000 Dot clock Picture frequency Resizing*3 quality*2 (MHz) A 13. 500 13. 500 27. 000 74. 250 74. 250 74. 250 25. 175 31. 500 25. 175 30. 240 31. 500 31. 500 36. 000 36. 000 40. 000 50. 000 49. 500 56. 250 57. 283 65. 000 75. 000 78. 750 94. 500 44. 897 94. 200 108. 000 121. 500 100. 000 108. 000 108. 000 135. 001 157. 500 108. 000 162. 000 A A A A A A A A A A A A A A A A A A A A AA AA AA AA AA A B B B B B B B B B OK OK OK OK OK Format Video/S-Video Video/S-Video YPBPR/RGB YPBPR/RGB YPBPR/RGB YPBPR/RGB YPBPR/RGB YPBPR/RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB RGB OK OK OK OK OK OK OK OK OK OK OK OK OK *1 The "i" appearing after the resolution indicates an interlaced signal. *2 The following symbols are used to indicate picture quality. AA Maximum picture quality can be obtained. A Signals are converted by the image processing circuit before picture is projected B Some loss of data occurs to make projection easier. [. . . ]