User manual PANASONIC PT-L797U

[. . . ] Model number: PT-L300U / PT-L797U Serial number: IMPORTANT SAFETY NOTICE WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Power Supply: This LCD Projector is designed to operate on 100 V ­ 240 V, 50 Hz/60 Hz AC, house current only. CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for power supplies up to 125 V, 7 A. If you need to use higher voltages or currents than this, you will need to obtain a separate 250 V power cord. [. . . ] (Refer to page 31. ) LOW FRONT/REAR FRONT/REAR FRONT [ REAR This setting should be changed in accordance with the projector setting-up method. Set to "FRONT" when using a normal reflective screen with the projector positioned in front of the screen, and set to "REAR" when using a translucent screen with the projector positioned behind the screen. This setting changes the lamp brightness. When set to "LOW", the luminance of the lamp is reduced, but the projector uses less power, and the operating noise is also reduced. The LOW position is recommended for narrow rooms where a high picture luminance is not essential or for watching movies. LAMP RUNTIME This setting displays the usage time for the lamp unit which is currently being used. NOTE: B The lamp's operating life varies depending on the usage conditions (such as the LAMP POWER setting and the number of times the power is turned on and off). DESK/CEILING DESK/CEILING DESK [ CEILING This setting should be changed in accordance with the projector setting-up method. Set to "DESK" when setting up the projector on a desk or similar, and set to "CEILING" when suspending the projector from the ceiling using the ceiling bracket which is sold separately. FAN CONTROL FAN CONTROL NORMAL [ HIGH If using of this projector at high 40 SD memory card What is the SD memory card (option)? The SD memory card is a semiconductor memory which at 24 mm x 32 mm x 2. 1 mm is about the size of a postage stamp. It is a next-generation recording medium which can be used instead of conventional storage devices such as MDs (mini discs), CDs (compact discs) and cassette tapes. In addition, it allows data to be repeatedly recorded, played and erased. The projector can be used to play computer image files, video images (still pictures) and moving pictures using the SD memory card. Record: Digital camera Computer Still image data Moving image data Play back: Still image data Moving image data 16MB Data that can be played back Still image data B DCF compliant still image data (See page 64 for details on DCF compliance. ) Moving image data B MPEG4 movie data (audio: G. 726 compliant) However, only files in ASF format can be played back. Note when using SD memory cards Do not turn off the projector's power or remove an SD memory card from the projector while the SD memory card is in use (while the access indicator is flashing). (See page 42. ) If this is not observed, corruption of the data on the SD memory card may occur. 41 Advanced Operation Inserting and removing the SD memory card Inserting the SD memory card Insert the SD memory card so that it is facing the correct way. # Open the slot cover at the side of the projector. Removing the SD memory card # Open the slot cover. USER If the user selects the desired still images, the still images that were selected by the user can be played back in order. When using user playback, you must select the still images to be played back using the "USER" command in the "SETTING" screen. When "USER" is selected, use the I and H buttons to select the user settings, and then press the ENTER button to start user playback. <Button functions during slide playback> B Pause/cancel automatic playback . . . . . . . ENTER button The following buttons can be used while manual playback or automatic playback is paused. B Play back next image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H button B Play back previous image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I button B Rotate images . . . . . . . . . . . . . . . . . . . F and G buttons B Return to still image selection screen . . . . . . . . SD MENU button PICTURE SLIDE SHOW VIDEO SELECT ITEM SETTING ALL FILE FOLDER USER 100 SETTING (page 46) This lets you set whether the slide playback is to be automatically continuous (automatic playback) or whether it can be switched manually (manual playback), and also lets you edit the user settings for "USER". 45 Advanced Operation The still image that will be the first image to be played back for the selected item will be displayed. SETTING SETTING1 AUTO MODE AUTO MODE The still images are played back automatically in order according to the following setting. SETTING2 MANUAL MODE USER SET NEW REPEAT INTERVAL 1 1 USER SET If adding settings for a new user, use the I and H buttons to select "NEW" and then press the ENTER button. The user setting edit screen will then be displayed. If you would like to change the settings for an existing user, use the I and H buttons to select the user setting file (0 9) that you would like to change, and then press the ENTER button. [. . . ] Jeter la lampe de la même manière qu'une lampe fluorescente. REMARQUE: B Le projecteur n'est pas fourni avec un bloc de lampe de rechange. Demander les détails au revendeur. Numéro de produit du bloc de lampe: ET-LAE100 ATTENTION: B Ne pas utiliser un bloc de lampe avec un numéro de pièce autre que celui indiqué ci-dessus. 73 Others Affichage à l'écran Témoin d'alarme de l'indicateur de la lampe Affiché pendant 30 secondes. L'affichage Plus de 1800 heures disparaît si l'on appuie sur Le témoin s'allume en n'importe quelle touche. [. . . ]