User manual PANASONIC PT-LB30NTY

[. . . ] Before operating this product, please read the instructions carefully and save this manual for future use. This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its bottom. [. . . ] B The picture and sound will be turned off. B Press any button on either the projector or remote control unit to return to normal operating mode. B The picture will then be enlarged to 1. The remote control unit functions during D. Press the F, G, IandHbuttons to move the enlarged area which you want to project. press the MENU button to return to the normal screen. NOTE: B The enlargement ratio can be changed within the range of x1 to x2, in steps of 0. When RGB signals are being input, the enlargement ratio can be changed within the range of x1 to x3, except when the "FRAME LOCK" is set to "ON". B If the type of signal being input changes while the digital zoom function is being used, the digital zoom function will be cancelled. NOTE: B You can also select "VOLUME" from the "MAIN MENU" to adjust the volume. This function lets you store a picture which is being projected into memory, so that you can display a still picture and a moving picture on the screen. B When NETWORK is selected, the screen display will be switched between four window style, index style, and 16 Index style. The remote control unit functions during INDEX WINDOW Press the F or G button to select a screen size. Press the I or H button to switch between the still picture screen and moving picture screen. Press the ENTER button to capture the present moving picture in a still window. press the MENU button to return to the previous screen. NOTE: B When the screen size is changed, the picture's aspect ratio will also change. Make sure that you fully understand the notes on "ASPECT" on page 43 before using the "INDEX WINDOW" function. The various settings and adjustments for this projector can be carried out by selecting the operations from on-screen menus. When an S-VIDEO/VIDEO signal is being input KEYSTONE correction (page 36) B When an S-VIDEO/VIDEO signal is being input, "DOT CLOCK", "CLOCK PHASE" and "FRAME LOCK" settings will not be displayed. This projector has unadjustable items and unusable functions depending on the signal being input. When an item cannot be adjusted or a function cannot be used, the corresponding on-screen menu display does not appear, and the item or function will not work even if the ENTER button is pressed. [. . . ] AA Maximum picture quality can be obtained. A Signals are converted by the image processing circuit before picture is projected. b Some loss of data occurs to make projection easier. Signals with "OK" are compatible with the "RESIZING" function. [. . . ]