User manual PANASONIC PV-DV52S

[. . . ] Please take time to fill in the information on the right. The serial number is on the tag located on the underside of your Camcorder. Be sure to retain this manual as your convenient Camcorder information source. Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Serial No. Safety Precautions WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. [. . . ] An S-video connection allows you to copy a high quality image. Connecting with the optional DV cable (Only for equipment with a DV terminal) S 2 (L2) / DV 2 Turn on the Camcorder and set to Tape Playback Mode. 3 Select the input channel on the TV set and recorder. 4 Move the joystick up to select the [1/;] icon to start playback. 7 Move the joystick down to select the [] icon to stop playback. 45 LSQT0973 Edit mode For more information, refer to the operating instructions for your TV set and recorder. When you do not need functional indications or date and time indications, press the [EXT DISPLAY] button on the remote control for no indication. (When you connect the Camcorder and a recorder with the DV cable, these indications may not appear. ) ª When neither image nor sound from Or, while pressing the [¥REC] button on the remote control, press the [PLAY 1] button. the Camcorder is output to the TV set Check that the plugs are inserted as far as they go. When no image is presented on the TV even if set [BASIC] >> [AV JACK] >> [OUT/Ë], set to [OUT]. (-60-) 5 Move the joystick up to select the [¥/;] icon again or press the [;] button on the remote control to stop recording. (Player) ª To cancel the standby for recording When the Camcorder is in standby for recording, move the joystick down and select the [] icon. Do not plug or unplug the DV cable during dubbing, or the dubbing may not be completed properly. If a picture (bilingual video, etc. ) containing main sound and sub sound has been dubbed, select the desired sound using [SETUP] >> [AUDIO OUT] on playback. Even if you use a device equipped with DV terminals such as IEEE1394, you may not be able to perform digital dubbing in some cases. [STANDARD]: Size specific to the printer [4k5 INCH] [5k7 INCH] [4k6 INCH] [A4] You cannot set paper sizes not supported on the printer. 7 Set [PRINT] >> [YES] to start printing. ª When you stop printing halfway Move the joystick down. Avoid the following operations during printing. These operations disable proper printing. Disconnecting the USB cable Removing the card Switching the mode dial Turning off the power Check the settings for the paper size, quality of print, etc. You cannot print pictures that cannot be played on the Camcorder. When the Camcorder and the printer are connected in the Tape Recording/Playback Mode, the [ WEB] or the [ WEB] Indication may appear on the LCD monitor. However, pictures cannot be printed. 1 1 USB cable PictBridge The [PictBridge] indication appears on the screen of the Camcorder. (When the printer is being recognized, the [PictBridge] indication blinks. ) When no card is inserted in the Camcorder, the [PictBridge] indication does not appear. (You cannot print any pictures. ) When the Camcorder and the printer are not connected properly, the [PictBridge] indication keeps blinking. [. . . ] 33 Sound Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 SP/LP Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Sports Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Spotlight Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]