User manual PANASONIC PV-DV901

[. . . ] The serial number is on the tag located on the underside of your Palmcorder. Be sure to retain this manual as your convenient Palmcorder information source. Your Ò Palmcorder is designed to record and play back in Standard Play (SP) mode and Long Play (LP) mode It is recommended that only cassette tapes that have been tested and inspected for use in Palmcorder with the Ò mark be used. This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. [. . . ] You may click [Browse] to look for and assign the path. Never connect the USB Connecting Cable until the USB Driver is installed. Before making these connections, turn off all devices which are to be connected. 2 Insert memory card into Palmcorder, then set card 1) Palmcorder 2) USB Connection Cable 3) USB terminal 4) Personal computer (not supplied) After making the connections, turn the connected equipment on. Appropriate driver to recognize Palmcorder is automatically installed by Windows Plug'n Play when connected for the first time. When using the USB Connection Kit, it is recommended that you use the AC Adaptor as the power supply of the Palmcorder. After the USB Driver is installed and USB Connection Cable is connected to the Palmcorder, open [My computer] or [Windows Explorer] to check that the drive is displayed as a removable disk drive (only when card is inserted into the Palmcorder). It enables you to operate in the same way as a floppy disk drive, and you can use the same drag and drop or copy methods. When the Palmcorder is connected for the first time in both the Card Playback Mode and the VCR/Camera Mode, the "Found New Hardware Wizard" is displayed. (If there are two or more USB terminals and you pull out and reconnect the USB cable to another terminal, this display appears. If the Palmcorder is connected to your personal computer, you can send video from the Palmcorder to the other parties via the network. This instruction manual describes only the procedures for installation, connection and start-up. Please read the PDF-based instructions for how to use the DV STUDIO 3. Before using for the first time, select [Readme] from [Start] >> [All programs (Programs)] >> [Panasonic] >> [DV STUDIO3], and read any supplementary details or updates. After reading the displayed contents, please carry out the installation according to instructions. If you wish to capture data from a tape, set the Palmcorder to VCR Mode and insert the tape. If a shortcut icon has been created on the desktop during installation, it is also possible to start by double-clicking on the icon. 726 Audio Decoder allows you to listen to MPEG4 sound with Windows Media Player. 726 Audio Decoder to be installed, the hard disk must have at least 16 MB of free space. Before proceeding with installation, check out the amount of free space on the hard disk. OS: Microsoft Windows XP Home Edition/Professional Microsoft Windows 2000 Professional Microsoft Windows Me (Millennium Edition) Microsoft Windows 98 Second Edition Also, the following software must be correctly installed. RAM: 32 MB or more Free hard disk space: At least 16 MB Carefully read the license agreement on the [Software License Agreement] window, and if you agree click [Yes]. [. . . ] During the "Parts" warranty period, there will be no charge for parts. You must carry-in or mail-in your product or arrange for in-home service, as applicable, during the warranty period. If non-rechargeable batteries are included, they are not warranted. This warranty only applies to products purchased and serviced in the United States or Puerto Rico. [. . . ]