User manual PANASONIC PV-GS70P

[. . . ] PV-GS70P. book 1 R Digital Video Camcorder Operating Instructions Model No. PV-GS70 Mini Before attempting to connect, operate or adjust this product, please read these instructions thoroughly. Guía para rápida consulta en español está incluida. For USA assistance, please call: 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic. com For Canadian assistance, please call: 1-800-561-5505 or visit us at www. panasonic. ca LSQT0693A PV-GS70P. book 2 Things You Should Know Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we're sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. [. . . ] Depending on the OS version, illustrations and icon names may vary. 1 ª For Windows 98SE/Me Users The following messages may be displayed during the installation depending on the environment of the personal computer. Install the USB Driver as instructed below. Otherwise, it won't be installed correctly. 1 The message, "The file `PMJ1519X. EXE' on [Unknown] cannot be found. . . " is displayed. 2 2 The message "The file `kstvtune. ax' on [Unknown] cannot be found. . . " is displayed. Enter "D:\USBDriver\Drivers\WebCam" (if the CD-ROM drive is assigned to the D drive) and click [OK]. 3 The message "The file `ksclockf. ax' on [Unknown] cannot be found. . . " is displayed. Enter "C:\Windows\system". If the "ksclockf. ax" file is missing in the above mentioned folder, insert the OS CD-ROM and assign the path. You may click [Browse] to look for and assign the path. Enter "C:\Windows\system" for Windows 98SE. Enter "C:\Windows\options\CABS" for Windows Me. If the "kstvtune. ax" file is missing in one of the 2 above-mentioned folders, insert the OS CD-ROM and assign the path. 70 PV-GS70P. book 71 Connecting Computer and Palmcorder 1, 3 2) 4) Install USB Driver before connecting. Never connect the USB Connecting Cable until the USB Driver is installed. Before making these connections, turn off all devices which are to be connected. 1 Install the supplied USB Driver. 2 Insert memory card into Palmcorder, then set card 3) playback mode. 3 Use auxiliary USB Connection Cable to connect. 1) 2 1 2 PC connecting mode. 1) Palmcorder 2) USB Connection Cable 3) USB terminal 4) Personal computer (not supplied) After making the connections, turn the connected equipment on. Appropriate driver to recognize Palmcorder is automatically installed by Windows Plug'n Play when connected for the first time. When using the USB Connection Kit, it is recommended that you use the AC Adaptor as the power supply of the Palmcorder. After the USB Driver is installed and USB Connection Cable is connected to the Palmcorder, open [My computer] or [Windows Explorer] to check that the drive is displayed as a removable disk drive (only when card is inserted into the Palmcorder). It enables you to operate in the same way as a floppy disk drive, and you can use the same drag and drop or copy methods. ª For Windows XP/2000 Users When the Palmcorder is connected for the first time in both the Card Playback Mode and the VCR/Camera Mode, the "Found New Hardware Wizard" is displayed. (If there are two or more USB terminals and you pull out and reconnect the USB cable to another terminal, this display appears. ) 1 2 3 3 Click [Next]. Testing by the manufacturer has confirmed functionality of this Palmcorder. If the [Insert disc] screen is displayed, click [OK]. After the completion of setting, click on [Finish]. 71 PV-GS70P. book 72 Using as a Web Camera 1, 3, 5 2) 4) If the Palmcorder is connected to your personal computer, you can send video from the Palmcorder to the other parties via the network. Audio may also be exchanged if the personal computer is configured accordingly. ª Operating environment To use the Palmcorder as a Web Camera, the additional minimum requirements must be met. Graphic display: High Color (16 bit) or more Desktop resolution of 800k600 dots or more Communication Speed: 56 kbps or faster is recommended Necessary software: Microsoft NetMeeting 3. 01 or later Other requirements (to send/receive audio): Sound card Microphone Speaker or headphones To use the Palmcorder as a Web Camera, the following conditions must be met. You have direct connection to the Internet. [. . . ] A purchase receipt or other proof of date of original purchase is required before warranty service is performed. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, EXCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES. In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. [. . . ]