User manual PANASONIC PV-M2767

[. . . ] Warnings and Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Fitting remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 How to use the LCD stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Choose the new position for the programme channel. Press the Yellow button again to confirm your decision. Yellow Prog. 1 2 3 4 5 : : : : : Programme edit Chan. CH44 CH51 CH41 CH47 CH37 Name Lock Off Off Off Off Off Confirm Sys SC1 SC1 SC1 SC1 SC1 Cancel ABC XYZ FTP 123 456 Tuning a programme channel Move to the Chan. Increase or decrease the programme channel number (you will see the TV retune to the new number as you change it) or use the C button for Direct Channel Access. Press the OK button to store this change. Prog. 1 2 3 4 5 : : : : : Programme edit Chan. CH44 CH51 CH41 CH47 CH37 Name Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 C OK ABC XYZ FTP 123 456 13 Tuning menu ­ Programme edit Renaming a programme channel Move to the Name column. The box at the bottom of the screen shows the character currently selected. Press the OK button to store the new name. OK Prog. 1 2 3 4 5 : : : : : Programme edit Chan. Select the programme position to be tuned. Press repeatedly until required station is found. When the desired station is found, press the OK button to store. Press the EXIT button at any time to go back to watching TV. OK CH12 TV 1 4 7 C 2 5 8 0 3 6 9 N 1 Manual tuning 02 99:21 Search down/up Store Exit Return 9 Direct entry 41 EXIT C 0 Note: If your VCR is connected to this TV by an RF cable only, choose programme position "0" to tune to the VCR signals. Manual tuning (via control panel) It is also possible to use the control panel buttons on the top of your TV to tune individual programme positions: Press the F button until Tuning mode is reached. Press the ­/ or +/ button to access Tuning mode. Press the TV/AV button to move between Change programme, Search and Change TV system. Press the ­/ or +/ button to change programme position or start search. When the desired station is found, press the STR button to store. Repeat above procedure to tune additional programme positions. Press the F button at any time to go back to watching TV. CH12 SC3 1 Manual tuning -, + TV / AV STR F 02 STR F : : : : Search Move cursor To store To exit 99:21 -/ +/ 41 TV / AV 16 Q-Link Q-Link allows the television to communicate with a compatible VCR or DVD Recorder. For Q-Link communication to work, the TV must be connected to a recording device with the "Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic" or "SMARTLINK" logo using a "fully wired" Scart cable between the AV1 / AV terminal of the television and the appropriate terminal on your VCR or DVD Recorder. For connection to the appropriate Scart terminal on the recording device, refer to the device's instruction book. When using a "NEXTVIEWLINK" device the main features possible are the following: Preset Download This allows the programme order from the TV to be downloaded to the recording device, helping to ensure that correct recordings are made; there are several ways to perform this operation: 1. [. . . ] No Colour Normal Sound No Picture No Sound Retune Channel (s). Poor or Distorted Picture Weak or No Sound Normal Picture There may be red spots, blue spots and green spots on the screen. Weak or Distorted Sound Sound reception may have deteriorated. Switch MPX setting (Sound menu) to Off until reception improves. This is a characteristic of liquid crystal panels and is not a problem. [. . . ]