User manual PANASONIC PV-V4021

[. . . ] (P30) (On the unit, 3D images are played back in 2D. ) When the 3D/2D switch is set to [2D] You can record conventional 2D pictures and 2D motion pictures. (P34, 38) In Wide & Zoom Dual-Shooting, you can simultaneously record images with differing angles of The camera records a picture with the right lens during recording of a motion picture with the left lens. (P68) -5- Before Use Care of the camera Remove the lens cover seal A before use. Do not subject to strong vibration, shock, or pressure. [. . . ] If the subject is overly bright or overly dark, you may not be able to set the White Balance. If this is the case, adjust to an appropriate brightness and then set the White Balance again. Exit the menu after it is set. Finely adjusting the White Balance You can finely adjust the White Balance when you cannot acquire the desired hue by setting the White Balance. 1 Touch [V]/[]/[]/[]/[] from the White Balance. 3 Drag the slide bar to make fine adjustments. Select [0] to return to the original White Balance. Exit the menu after it is set. 4 Note The White Balance icon on the screen turns red or blue. You can finely adjust the White Balance independently for each White Balance item. The White Balance fine adjustment setting is reflected in the picture when using the flash. The White Balance fine adjustment setting is memorised even if the camera is turned off. The White Balance fine adjustment level in [] returns to [0] when you reset the White White Balance fine adjustment cannot be set for [B/W], [Sepia], [Cool] and [Warm] in [Color Mode]. This mode allows you to take close-up pictures of a subject, e. g. when taking pictures of flowers. [ ] ([AF Macro]) You can take pictures of a subject as close as 5 cm (0. 17 feet) from the lens by rotating the zoom lever upmost to Wide (1k). You can take a picture with the Digital Zoom up to 3k while maintaining the distance to the subject for the extreme Wide position [5 cm (0. 17 feet)]. The image quality is poorer than during normal recording. (Digital Zoom range) [ [ ] ] ([Macro Zoom]) ([Off]) j Note We recommend using a tripod and the self-timer. We recommend setting the flash to [OE] when you take pictures at close range. If the distance between the camera and the subject is beyond the focus range of the camera, When a subject is close to the camera, the effective focus range is significantly narrowed. the picture may not be properly focused even if the focus indication lights. Therefore, if the distance between the camera and the subject is changed after focusing on the subject, it may become difficult to focus on it again. Macro Mode gives priority to a subject close to the camera. Therefore, if the distance between the camera and the subject is far, it takes longer to focus on it. When you take pictures at close range, the resolution of the periphery of the picture may decrease slightly. Macro Zoom Mode cannot be used in the following cases. [. . . ] This does not affect the performance or quality of the camera. The lens clicks. When the brightness changes due to zoom or camera movement etc. , the lens may click and the picture on the screen may drastically change. The sound is caused by the automatic adjustment of the aperture. This is not a malfunction. The clock is reset. [. . . ]