User manual PANASONIC PV-V4624S

[. . . ] Location of Controls/ Reset All VCR Memory Functions Multi Function Display (FRONT DISPLAY) Power Indicator Lights up when power is on. Timer Indicator Lights up when the VCR is set for a Timer Recording, or when One Touch Recording (OTR) is used. Flashes when a Timer Recording is set, but a tape has not been inserted into the VCR. Spanish Quick Use Guide/ Guía para rápida consulta CONEXIONES/CONFIGURACIÓN INICIAL (READY TO PLAY) Realice la conexión de la antena o TV por cable antes de enchufar el cable de CA. La videograbadora iniciará automáticamente la fijación de los canales y del reloj al enchufar el cable de CA. Spanish Quick Use Guide/ Guía para rápida consulta OPERACIONES BÁSICAS PARA LA REPRODUCCIÓN PROGRAMACIÓN FÁCIL PARA LA GRABACIÓN CON TEMPORIZADOR PROG para visualizar la 1 Inserte una cassette. pantalla 2 Presione PLAY para reproducir el cassette. [. . . ] · Do not mix alkaline with manganese batteries. Tuner Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69 CABLE Channels: Midband A ~ I (14 ~ 22) Superband J ~ W (23 ~ 36) Hyperband AA ~ EEE (37 ~ 64) Lowband A-5 ~ A-1 (95 ~ 99) Special CABLE channel 5A (01) Ultraband 65 ~ 94, 100 ~ 125 Operating Temperature: 5 °C ~ 40 °C (41 °F ~ 104 °F) Operating Humidity: 10 % ~ 75 % Weight: 2. 55 kg (5. 6 lbs). Dimensions: 430 (W) x 98 (H) x 240 (D) mm 16-15/16" (W) x 3-7/8" (H) x 9-7/16" (D) inch b Select channels on VCR Press VCR/TV in Stop or Pause mode. ("VCR" lights on Multi Function Display), select channels on VCR. Notes · Watching one channel and recording another is not possible when using Cable Box or DSS Receiver. · After 5 minutes in Pause mode, VCR stops to protect the tape and the video heads. P DT START STOP 1 13 2:00p 3:20p 2 14 7:00p 7:30p 3 -- --:-- --:-4 -- --:-- --:-- CH SPD 02 SLP 10 SP -- --- -- Press to select desired program. CHANNEL / TRACKING/ V-LOCK (Selects channel/ reduces picture noise during Play and Slow mode) VOLUME UP/DOWN (Adjusts TV volume) CANCEL : ADD/DLT SELECT : SET : END : PROG Light Tower Universal Remote Control 1) Press to display. 2) Repeat Step 2 (above) to set new programs. LIGHT button: When pressed, available buttons light and selected mode button (TV, VCR, or DSS CABLE) flashes 5 seconds. If no button is pressed, light goes out in 5 seconds. Also, hold down a button to confirm the selected mode (mode button flashes) in the dark. EJECT is not available during recording. If "AUTO CLOCK SET IS INCOMPLETE" appears, manually set clock (below). c To Replace program. . . P DT START STOP 1 13 2:00p 3:20p 2 14 7:00p 7:30p 3 -- --:-- --:-4 -- --:-- --:-CH SPD 02 SLP 10 SP -- --- -- 3 Press STOP to stop tape. Rapid Rewind/FF AUTO CLOCK SET IS I NCOMPLETE PLEASE SET CLOCK BY PRESSING ACT I ON KEY Press REW or FF in Stop mode to rewind or fast forward tape. · Rewinds a T-120 tape in approx. 1 minute. SELECT : SET : EXIT : PROG or This video recorder, equipped with HQ (High Quality) system, is compatible with existing VHS equipment. Only tapes tested and inspected for use in 2, 4, 6, and 8 hour machines are recommended. 1 -- --:-- --:-- -- -2 14 7:00p 7:30p 10 3 -- --:-- --:-- -4 -- --:-- --:-- -SP --- CH AUTO SET PROCEEDING Note: Designs and specifications are subject to change without notice. Press EJECT on remote, or STOP/EJECT on VCR to eject tape. S-VHS Quasi Playback (SQPB) Front View of the VCR Prevent Accidental Tape Erasure Break off the tab to prevent recording. To record again CANCEL : STOP Manual Clock Set If Auto Clock Set was incomplete. AUTO CLOCK SET PROCEEDING Features for a Quality Picture Digital Auto Picture Automatically controls the video output signal for less noise depending on the tape condition. 1 Press ACTION* on remote to display CLOCK menu. Safety Precautions/Mesures de sécurité To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To prevent electric shock, match wide blade of plug to wide slot, fully insert. AVERTISSEMENT : Afin de prévenir tout risque d'incendie ou de chocs électriques, ne pas exposer cet appareil à la pluie ou à une humidité excessive. ATTENTION : Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond. FCC WARNING : Any unauthorized changes or modifications to this equipment would void the user's authority to operate. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Digital Auto Tracking Record Tab Screw driver Cover the hole with cellophane tape. Continuously analyzes the signal and adjusts for optimum picture quality. CANCEL : STOP Manual Tracking Control (to reduce picture noise) Use during Playback and Slow Motion mode to reduce picture noise. Press CH (TRACKING) / on the remote control or on the VCR until the picture clears up. To return to Auto Tracking, press POWER off, then on again a few seconds later. Record/Playback Time Only use tapes with the mark in this unit. · Tapes recorded in S-VHS can easily be played back with normal VHS quality (p. Tape Speed Setting SP (Standard Play) If you use a cable box, turn it on and set it to the Public Broadcasting Station (PBS) channel in your time zone. [. . . ] · If stereo broadcast is weak and display flickers, select MONO audio mode for possible better results. STOP 1 2 : 0 0AM STEREO SAP MONO CH 02 0 : 00 : 00 SP 1 Press TAPE POSITION to detect tape position. Press CM/ZERO in Stop mode to start ZERO SEARCH. · Unit will go into FF or REW mode and stop at the last point the Counter was set to 0:00:00. DETECTING TAPE POSITION 1 2 3 4 5 6 R L VHF/UHF OUT TO TV CABLE BOX IN OUT IN OUT R AUDIO L VIDEO VHF/UHF Notes 5 REW 1 2 : 3 0AM CH 02 0 : 30 : 30 SP IN 1 OUT VCR SAP broadcast Secondary Audio Program (sub language) broadcast. Select SAP audio mode for the sub language. STOP 1 2 : 0 0AM STEREO SAP MONO CH 02 0 : 00 : 00 SP · Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereo tapes will playback in monaural sound. [. . . ]