User manual PANASONIC RAKSA937MK

[. . . ] THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET. If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt please consult a qualified electrician. Caution for AC mains lead For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. [. . . ] (l 49) [ECONOMY (BATT)]/[ECONOMY (AC)] will not work while you adjust the 3D Conversion Lens attachment position. When the 3D Conversion Lens is attached, the auto slow shutter setting is [AUTO SLOW SHTR (3D)]. The default setting of [AUTO SLOW SHTR (3D)] is [ON]. (l 69) While 3D recording if moving the unit fast, the message is more likely to appear. RAKSA937MK The LCD monitor on this unit will not display in 3D. If the unit is turned on with the lens cap attached in the shade etc. , the screen may appear to be blue. In such a case, remove the lens cap to return the screen to normal. VQT4C83 85 Functions that cannot be used during 3D recording When recording with the 3D Conversion Lens, you cannot use certain functions. Functions not available during 3D recording (Button/lever operations) j Hybrid Optical Image j Intelligent Auto Mode (Night portrait, Macro) j 1080/50p recording j Manual focus j Touch Zoom Stabilizer*1 (Motion picture recording functions) j Recording Mode ([1080/50p], [HA], [HG], [HX], [HE], [iFrame]) j Smile Shot j Tele Macro j Zoom Mode*3 j Interval Recording j Digital Cinema j Face Recognition j Face framing display*4 j HC-X900 / HC-X900M Microphone Setup ([ZOOM MIC]) RAKSA937MK Zoom Microphone j Histogram (Setup menu) j Quick power on j Quick Start j HC-X900 / HC-X900M Power LCD*2 j Initial set (Still picture recording functions) j Picture size j Aspect Ratio j Flash j Flash Level j Red-eye Reduction j Night portrait in Scene Mode j AF Assist Lamp *1 The Optical Image Stabilizer and Optical Image Stabilizer Lock can be used. *2 This can be used when the LCD monitor is displaying in 2D. *3 Only the Digital Zoom (up to 1. 5k) can be used. *4 HC-X900 / HC-X900M Face framing display will be displayed when the LCD monitor or TV output setting is set to 2D. RAKSA937MK Face framing display will be displayed when the TV output setting is set to 2D. 86 VQT4C83 Advanced (Playback) Playback Operations Motion picture playback using operation icon For details on the basic playback operations, refer to page 35. Playback operation Playback display Operating steps Touch 5 during playback to fast forward. This will then be displayed as a thumbnail. A portion judged to be clearly recorded will be detected and displayed in thumbnail if you select [HIGHLIGHT]. 3 4 (When [MINUTES] is selected) Touch / to set the time. It can be set up to a maximum of 60 minutes. Touch [ENTER]. Touch the thumbnail to be played back. / . Next (Previous) thumbnail can be displayed by touching Repeat Playback Playback of the first scene starts after playback of the last scene finishes. MENU : [VIDEO SETUP] # [REPEAT PLAY] # [ON] The indication appears on the full screen views. All the scenes are played back repeatedly. (When playing back motion pictures by date, all the scenes on the selected date are played back repeatedly. ) Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. MENU : [VIDEO SETUP] # [RESUME PLAY] # [ON] appears on the thumbnail view of the stopped If playback of a motion picture is stopped, scene. The memorised resume position is cleared if you turn off the unit or change the mode. (The setting of [RESUME PLAY] does not change. ) VQT4C83 89 Zooming in on a still picture during playback (Playback zoom) You can zoom in by touching a still picture during playback. 1 Touch and hold the part you wish to zoom in on during still picture playback. The still picture is zoomed in the following order: k1 # k2 # k4. Touch and hold the screen to zoom in from the normal display to k2, Touch the screen to zoom in from k2 to k4. The still picture is zoomed in on, centring on the part you touched. 2 Move to the zoomed in position by touching /// or slide while touching the screen. A Displayed location of the zoom The location of the zoom displays for about 1 second when zooming in (zooming out) or moving the displayed location. The more picture is enlarged, the more its quality deteriorates. Zooming out from the zoomed still picture Touch Touch to zoom out. (k4 # k2 # k1) to return to normal playback (k1). You can also perform zoom operations using the zoom lever. Playback zoom cannot be performed for the still pictures recorded in 3D. [. . . ] 95 cm (Tele) Intelligent Auto Macro; Approx. 95 cm (Tele) Filter diameter: 49 mm Zoom: 12k optical zoom, 23k i. Zoom, 30k/700k digital zoom Image stabilizer function: Optical (Hybrid Optical Image Stabilizer, Active Mode (Rotation correction), Optical Image Stabilizer Lock function) Monitor: HC-X900 / HC-X900M 8. 8 cm (3. 5z) wide LCD monitor (Approx. 1152 K dots) RAKSA937MK 7. 5 cm (3z) wide LCD monitor (Approx. 460 K dots) HC-X900 / HC-X900M Viewfinder: 0. 61 cm (0. 24z) wide EVF (Approx. [. . . ]