User manual PANASONIC RF-SW70

[. . . ] Do not pull, bend, or place heavy items on the code. grasp the plug firmly when unplugging the code. Pulling the AC power supply code can cause electric shock. Do not let metal objects fall inside the unit. [. . . ] Do not mix old and new batteries or different types of batteries. ⷠDo not recharge ordinary dry cell batteries. Do not allow them to contact flame or water. ⷠIf the unit is not going to be used for a long time or if the unit is to be powered exclusively by AC power, remove the batteries and store them in a cool dark place. ⷠDo not keep together with metallic objects such as necklaces. Mishandling of batteries can damage other items, cause damage to the unit, and may cause a fire through short-circuiting or electrolyte leakage. If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body. To turn the power off, press the button again. Note When the power is turned on again, the broadcast station that was last tuned in when the power was turned off, will be tuned in. "TUNED" appears for about 1 second when a When is pressed, automatic tuning starts, and it station is tuned in. H I G H - Set to this position when While listening to the station you want to register, hold down one of the number buttons [1] to [5] for at least 1 second. The number of the button you pressed and "PROGRAM" now appear on the display panel, and the station is registered in the button concerned. To register a station greater than 5, first press [5+], then, e. After the power has been turned on, press the number button in which the desired station has been registered. With the new station you want to register already tuned in, press and hold the button with the number whose registered station is to be changed so that you will overwrite the existing station with the new one. Listening to a station which you have registered To display the clock Press when the unit is on The time is always displayed while the power is off. Note The clock is accurate to within ± 60 seconds a month. You can set the times at which to turn the power on and off and set the station and volume level while the power is on. These steps can be taken while the power is on. The unit must be off for the timer to operate. Note Even when the timer settings are set to OFF, the timer time settings remain in the memory so that when the timer settings are next set to ON, the timer function will be activated at the set times. [. . . ] First turn on the power, and then press Connect the AC power supply code firmly to the unit and the outlet. If the unit still cannot be turned on, disconnect the AC power supply code, remove the batteries, and consult your dealer. 0 W (RF-U300) Battery 9 V (Six R14/LR14 batteries) -If you see this symbolDimensions (W x H x D) Mass with batteries without batteries 270 mm x 152 mm x 92. Note Specifications are subject to change without notice. [. . . ]