User manual PANASONIC RP-WF6000

[. . . ] Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. For optimum performance and safety, please read the instructions carefully. You can enjoy multi-channel surround sound when you listen with the headphones. [. . . ] This means that the battery has run down and should be charged or replaced. If the sound is distorted, intermittent or there is excessive background noise while using the headphones, the battery should be charged or replaced. If the operation time of the battery becomes extremely short after charging, the battery's service life has reached the end. Be sure to replace it with the dedicated rechargeable battery RP-BP6000 (optional). The power turns off automatically when you remove the headphones. (Auto power on/off function) Do not pull up the free-adjusting band i when not using the headphones. This may cause the auto power on/off function to switch the headphones back on and battery power to run down. When connecting the optical DIGITAL AUDIO OUT terminal of, for example, a portable DVD player or portable CD player to the transmitter's DIGITAL IN 1 or 2 terminal, use the optional digital cable (mini plug to angular plug) or similar. For your reference *1 Operation is not guaranteed when connecting to a computer's optical DIGITAL AUDIO OUT terminal. *2 When the connected equipment supports PCM output only, the surround sound will become DOLBY PRO LOGIC II. Using alkaline dry cell batteries (not included) Use "LR6, AA" alkaline dry cell batteries. If the analogue sound input is distorted (there may also be noise), switch the ATT control to [-8 dB]. This unit uses radio waves to transmit the signals so use the headphones within the range of the radio waves. Use an audio cable when connecting the AUDIO OUT terminals of a video cassette player, television etc. The most appropriate frequency is automatically set when the headphones are taken off the transmitter. When the headphones are used outside the range of the radio waves or the radio waves weaken, the sound is broken. move nearer to the transmitter or reset the frequency ( page 16 [Setting the most appropriate frequency]). 4 GHz radio frequency band, obstacles (such as reinforced concrete walls and metal doors) may cause the sound to be broken. This is a characteristic of radio waves and not a malfunction. The sound heard from the headphones will differ depending on where the transmitter is placed and the kind of location in which it is used. We recommend placing the transmitter where the sound is received best. The sound may be broken when the unit is used at the same time as other equipment that uses the 2. [. . . ] Sound is distorted, intermittent or there is excessive background noise during use. Recharge it or replace the alkaline dry cell batteries with new ones. Y Make sure that there is no other equipment that uses the 2. Cannot select dual audio (MAIN/SUB) when input is digital. [. . . ]