User manual PANASONIC RP-WF810

[. . . ] Marking sign is located on bottom of the unit. Check with the proper authorities before trying to use this unit in a country other than where it was purchased. The radio frequencies this unit uses (863­865 MHz) are not permitted in some countries. The socket outlet shall be installed near the equipment and easily accessible or the mains plug or an appliance coupler shall remain readily operable. [. . . ] Note The OPR/CHG indicator lights in red when the transmitter receives input. It does not light just by connecting the transmitter to an AC power source. Note Under optimum conditions, the headphones can pick up clean signals from the transmitter to a maximum of 100 meters. Metal between the two units and the presence of other radio waves can cause interference to occur at a shorter distance. This interference can be cleared by moving closer to the transmitter, removing the obstructions, or changing the transmission frequency ( see page 12). You may occasionally experience interference due to dead spots in the area covered by the transmitter. This phenomena occurs with any kind of radio signal and is not a malfunction. Dead spots can be moved by moving the transmitter and the headphones. Turn on the unit the transmitter is connected to. Turn the volume on the sound source up as much as possible without causing distortion. Sound is more susceptible to noise interference when the source volume is set to low. Use the headphone housings to move the slider so that both ears are covered. If there is interference, turn the [TUNING] dial to reduce it. See page 12 for more detailed instructions on how to reduce interference. Turn off the unit the transmitter is connected to. Note Avoid listening for prolonged periods of time to prevent hearing damage. Discontinue use if you experience discomfort with the headphones that directly contact your skin. Continued use may cause rashes or other allergic reactions. When audio signals are supplied, the transmitter's power is turned on (The OPR/CHG indicator lights in red. ); when audio signals have not been supplied for 2 or 3 minutes, its power is automatically turned off. ) When the volume of the connected unit is too low, this function doesn't work. Turn up the volume as much as possible without causing distortion. [. . . ] Sales and Support Information (For United Kingdom and Republic of Ireland) Customer Care Centre For customers within the UK: 08705 357357 For customers within the Republic of Ireland: 01 289 8333 Visit our website for product information E-mail: customer. Uk Direct Sales at Panasonic UK Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday - Thursday 9:00am ­ 5:30pm, Friday 9:30am ­ 5:30pm (Excluding public holidays). Or go on line through our Internet Accessory ordering application at www. Most major credit and debit cards accepted. [. . . ]