User manual PANASONIC RP-WH20

[. . . ] The headphones are compatible with Dolby Digital, Dolby Pro Logic II, DTS, Dolby Digital Surround EX and DTS- ES. The headphones are compatible with the MPEG-2 AAC audio format. The headphones use non-compressed digital wireless transmission that provides sound quality equal to a CD and is resistant to external noise. The "Personal Surround" technology developed by Panasonic and the large diameter, high quality Ø 50 mm driver unit mean you can enjoy the powerful presence of surround audio from these headphones. [. . . ] The AC adaptor power cord (supplied) e is for use with this unit only. Also do not use cords for other equipment with this unit. Check that the left and right sides of the headphones are correctly placed on the left and right sides of the transmitter. Check that the charging terminals on the headphones and transmitter are touching each other. When there is dirt on the charging terminals of the headphones or the transmitter, remove it gently with a cotton bud, etc. Before connecting, turn off the digital or analogue equipment. After connecting the digital or analogue equipment to the transmitter, connect the AC adaptor (supplied) ( page 8 [Charging] step 1) Refer/Read to the operating instructions of the connected equipment. Use the supplied optical digital cable to connect a television or DVD player's*1 optical DIGITAL AUDIO OUT terminal*2 to the transmitter's DIGITAL IN 1 or 2 terminal. Transmitter Television with an optical DIGITAL AUDIO OUT terminal Optical digital cable (supplied) Remove the plug caps and insert the cable firmly into the correct terminals. A DVD player Equipment with an optical mini DIGITAL AUDIO OUT terminal e. To charge the battery after using the headphones To check the remaining battery power Put the headphones back on the transmitter. (Refer to your DVD player's operating instructions for further details. ) If "OFF" has been selected for the DVD player's DTS digital setting, sound may not be output even when DTS output is selected in the DVD menu. When connecting a DVD player and this unit with an analogue connection, sound may not be output. change to a digital connection if this happens. There may be some noise emitted during functions such as rewinding and fast forwarding with a DTS format DVD. The movie may suddenly switch to a very noisy scene and you could damage your ears if the volume is raised too high. Avoid listening for prolonged periods of time to prevent hearing damage. Be sure to use the headphones within the range of the radio waves. Discontinue use if you experience discomfort. Continued use may cause rashes or other allergic reactions. For your reference If you disconnect the AC adaptor from the transmitter before taking off the headphones, there may be static noises. [. . . ] Refer to the operating instructions for the DVD player and set the DTS digital output setting on the DVD player to "ON". Y You are playing a signal that is not recorded in DTS format. Y The chapter being played is not DTS format. Y The DVD player is not DTS compatible ( Use a DTS compatible DVD player. [. . . ]