User manual PANASONIC RR-QR200

[. . . ] Inserting the batteries IC Recorder Operating Instructions Model No. Long life alkaline batteries are recommended. If rechargeable batteries are to be used, rechargeable batteries manufactured by Panasonic are recommended. RR-QR400 RR-QR200 RR-QR100 1 + Ribbons 3 2+ AAA SIZE (R03/LR03, UM-4) (not included) Model RR-QR200 is only for the U. S. A. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. This manual was printed with soy based ink. Note . [. . . ] Timer playback cannot be selected while an empty folder is selected. Preparation: Select the folder to record into. (page 6, step1) Preparation: Select the folder and the file you want to play. (page 6, steps1-2) 1 Press [MODE] several times until the timer recording display is displayed. RECF 1 Press [MODE] several times until the timer play display is displayed. PLAYF Timer recording display Timer play display 2 Within 10 seconds, turn [PLAY/STOP, SEL] to select "On". RECF 2 Within 10 seconds, turn [PLAY/STOP, SEL] to select "On". PLAYF 3 Set the times. 3 Set the times. 1 Within 10 seconds, press [PLAY/STOP, SEL]. 2 Within 10 seconds, turn [PLAY/STOP, SEL] to change the start time. Start time PM 1 Within 10 seconds, press [PLAY/STOP, SEL]. The start time flashes. B RECF 2 Within 10 seconds, turn [PLAY/STOP, SEL] to change the start time. B PLAY F Start time PM 3 Within 10 seconds, press [PLAY/STOP, SEL]. The start time is set and the finish time flashes. 4 Within 10 seconds, turn [PLAY/STOP, SEL] to change the finish time. Finish time PM B RECF 3 Within 10 seconds, press [PLAY/STOP, SEL]. The display changes in the following order indicating completion of the settings. Playback start time # Selected file number # Normal display The timer playback stops automatically. 5 Within 10 seconds, press [PLAY/STOP, SEL]. The display changes in the following order indicating completion of the settings. Recording start time # Recording finish time # Current number of files # Normal display The timer indicators (RECF and PLAYF) light to show which timer is set and flash when the timer is operating. To cancel the timer: Select "OFF" in step 2 and press [PLAY/STOP, SEL]. To check the timer settings: Press [MODE] several times until the timer display is displayed. The display will then change to show the following automatically. Timer recording: Start time, finish time, folder the file will enter. Timer playback: Start time, folder and file to be played. The timers can only be set within a single twenty-four hour period. The recording timer can only be set if there is one minute or more of available recording time. If you make recordings before timer recording begins, be aware that the time available is reduced. The timer recording can only continue as long as the available time allows. If VAS is left on during timer recording, the recording may be shorter than the set time. The timer settings are canceled if the clock is cleared (i. e. the batteries are removed from the battery compartment). 9 10 The operation tone The operation tone can be turned on and off. The tone is originally set to "On". Troubleshooting Guide Before requesting service, make the below checks. [. . . ] THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS OR DISCS. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. [. . . ]