User manual PANASONIC RX-D13

[. . . ] Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions fundamentally explain the operation of RX-D15. The model number and serial number of this product can be found on either the back or the bottom of the unit. [. . . ] Power Source--The unit should be connected to power supply only of the type described in the operating instructions or as marked on the unit. Polarization--If the unit is equipped with a polarized AC power plug (a plug having one blade wider than the other), that plug will fit into the AC outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Power Cord Protection--AC power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Never take hold of the plug or cord if your hand is wet, and always grasp the plug body when connecting or disconnecting it. Nonuse Periods--When the unit is not used, turn the power off. When left unused for a long period of time, the unit should be unplugged from the household AC outlet. Lens CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Installation Environment 1. Water and Moisture --Do not use this unit near water--for example, near a bathtub, washbowl, swimming pool, or the like. Condensation--Moisture may form on the lens in the following conditions. . . ¡ immediately after a heater has been turned on. ¡ when the unit is suddenly moved from a cold environment to a warm one. If moisture forms inside this unit, it may not operate properly. To correct this problem, turn on the power and wait about one hour for the moisture to evaporate. Heat--The unit should be situated away from heat sources such as radiators and the like. It also should not be placed in temperatures less than 5°C (41°F) or greater than 35°C (95°F). CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPLIANCE TO RAIN, SPLASHING, DRIPPING OR MOISTURE. Placement 1. Ventilation--The unit should be situated so that its location or position does not interfere with its proper ventilation. Allow 10 cm (4" ) clearance from the rear of the unit. [. . . ] 87. 9­107. 9 MHz (200 kHz steps) 87. 5­108. 0 MHz (100 kHz steps) 520­1710 kHz (10 kHz steps) 44. 1 kHz 16 bit linear Semiconductor laser (wavelength 780 nm) 2 channel, stereo Less than possible measurement data 1 bit DAC 4 track, 2 channel, stereo Variable sound monitor AC bias Multi Pole magnet Discs Choose discs with this mark: This unit may not be able to play some CD-R due to the condition of the recording. Continued use of irregular shaped CDs can damage the unit. x xx xx xxxx xx xx xx xx xx xx Do not; · use discs that have extra labels or stickers attached. Carefully remove leftover adhesive before use. · attach scratch-proof covers or any other kind of accessory. [. . . ]