User manual PANASONIC RX-CT980

[. . . ] 3 4 4 5 5 6 7 8 DANGER ADVARSEL VARO!VARNING ADVARSEL INVISIBLE LASER RADIATION WHEN OPEN. USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÅ UDSÆTTELSE FOR STRÅLING. [. . . ] ·Keep the transmission window and the unit's sensor free from dust. ·Operation can be affected by strong light sources, such as direct sunlight, and the glass doors on cabinets. (R6, AA, UM3) SENSOR Do not; ·put heavy objects on the remote control. (Wipe with a soft, dry cloth. ) RQT5142 Page 9 99. 9. 10, 10:02 PM Compact disc operations 9 CDs Other modes of play Preparation: Press [ /CLEAR] to switch to CD mode. Numbered buttons Remote control only Direct access play Starts normal play from a selected track Select the track with the numbered buttons. For tracks numbered 10 and over, press [10] then the two digits. Compact disc operations Repeat play Plays a track or all tracks repeatedly PORTABLE STEREO CD SYSTEM Press [PLAY MODE] before or during play to select the mode. Each time the button is pressed : One track repeated : All tracks repeated No display (canceled) To repeat selected tracks Start program play ( page 11). Press [PLAY MODE] to select " ". To cancel Press [PLAY MODE] until " " and " " are cleared. The mode is also canceled if the CD tray is opened. Random play Plays the tracks once each in random order Press [PLAY MODE] before or during play to select " ". Each time the button is pressed No display (canceled) To cancel Press [PLAY MODE] to clear " ". If canceled during play, play continues to the end of the disc. The mode is also canceled if the CD tray is opened. ·Random play does not work when " " is displayed (press [ /CLEAR] first). ·Tracks cannot be selected with the numbered buttons. ·You cannot skip to tracks already played. ·Search can be done within tracks only. 10 RQT5142 Page 10 99. 9. 10, 10:03 PM CDs Program play: Select up to 36 tracks to play in the order you choose Preparation: Press [ /CLEAR] to switch to CD mode. Enter the track number with the numbered buttons. Press [ PORTABLE STEREO CD SYSTEM ]. All the tracks are played in the selected order. Preparation: (when using batteries) Press [ ]. Press [ mode. TAPE/CD] to switch to TAPE (Unit comes on when using AC power. ) Press [ DECK 1] to open the deck and load a cassette. Play starts from the side facing up Close deck by hand. (Play direction automatically switches to " deck is closed. ) " when the Press [ ] to start play. : Side facing up played : Side facing down played Press [­, +VOLUME] to adjust the volume. To stop play Press [ Displayed when cassette not loaded. TAPE/CD]. One touch play (When using AC power) Cassette deck operations When a cassette is loaded, press [ The unit comes on and play starts. ]. To change sides Press [ ] during play. Each time the button is pressed Fast-forward and rewind Tape facing out Insert inside the guides While stopped Press [ REW­TUNE/ TUNE/ ­FF] (forward). ] (backward) or [ Cassette tape selection and care The unit can play normal, high, and metal position tapes. Selected deck ·Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. ·Tape slack can get caught up in the mechanism and should be taken up before the tape is played. ·Endless tapes can get caught up in the deck's moving parts if used incorrectly. Use tapes appropriate to this unit's auto-reverse mechanism. Tape counter Play direction 14 RQT5142 Page 14 99. 9. 10, 10:04 PM Cassettes Tape Program Sensor (TPS) TPS finds the beginning of a track and resumes play from there. During play Press [ or [ REW­TUNE/ ] (backward) TUNE/ ­FF] (forward). Each press increases the number of tracks skipped (up to 9). REW TUNE FF Number of tracks skipped TPS may not operate correctly in the following situations: ·If the interval between tracks is less than 4 seconds. ·If there is noise between tracks. [. . . ] Recordings made with the record timer are unaffected. Sound quality You can choose one of four types of sound quality. XBS: Adds punch to rock Clear: Clarifies higher sounds Soft: Use this setting for background music Vocal: Adds gloss to vocals Press [PRESET EQ]. The current setting is displayed. XBS Within 2 seconds Press [PRESET EQ] to select a setting. Clear Each time the button is pressed XBS Clear Soft EQ OFF (canceled) Vocal Soft Recordings are unaffected by changes to sound quality. Vocal Creating a three dimensional sound field with S. Virtualizer Remote control only Use when playing stereo sources. Timer operations Press [S. VIRTUALIZER]. Press again to cancel. Recordings are unaffected by this feature. The actual effect depends on the source played. PORTABLE STEREO CD SYSTEM 22 RQT5142 Page 22 99. 9. 10, 10:13 PM Using auxiliary equipment You can play or record sound from other equipment through this unit's AUX IN terminal. [. . . ]