User manual PANASONIC RX-CW200

[. . . ] Do not leave it in an automobile exposed to direct sunlight for a long time with the doors and windows closed as this may deform the cabinet. Avoid cuts, scratches, or poor connections in the AC mains lead, as they may result in possible fire or electric shock hazard. Also, excessive bending, pulling or splicing of the lead should be avoided. Do not unplug the AC mains lead by pulling on the lead. [. . . ] 13 º Sound virtualizer button (S. VIRTUALIZER) . . . . . . . . . . . . . . 17 / Auto scan button (AUTO SCAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ¤ Timer fader button (TIMER FADER) . . . . . . . . . . . . . . . . . . . . . . . . . . 19 < Display select button (DISPLAY) . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 13 > Repeat button (REPEAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 fi Random play button (RANDOM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 fl Tuning/rewind/fast-forward buttons (REW/­ , +/FF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 13 Preset tuning/preset scan/CD skip/search buttons ( S / 4, 3 / T) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 10 When the unit is supplied with AC power, buttons 1 , 2 , 6 , 11 , 12 , 14 , 17 , 22 and 23 function in the same way as the controls on the main unit. To save power, the unit cannot be turned on from the remote control when batteries are used. B s Batteries (not included) B 7 Insert so the poles (+ and ­) match those in the remote control. R6, AA, UM-3 1 2 Remove if the remote control is not going to be used for a long period of time. If channel 3 is not needed Select channel 3. While " " is flashing Turn [TIME/PRESET TUNE CD SKIP ] to display "­ ­". Now, when you perform preset scan or turn [TIME/PRESET TUNE CD SKIP ] to select a preset channel, channel 3 is skipped. Hints · To select the cancelled channel, press the remote control's numbered buttons. · You can press [S / 4] or [3 / T ] on the remote control for 3 turning of [TIME/PRESET TUNE CD SKIP ] described above. RQT5189 Listening CD SKIP ] to select a channel and press [·MEMORY*CLEAR]. 9 TAPE / CD 2 7 CDs 1 s Press [0 CD] to open the tray. (The unit comes on. ) Load a CD and press [0 CD] to close the tray. 2 s Press [6 CD] to start play. 3 s Press [ +, ­ VOLUME] to adjust the volume. Plays to the end of the CD and stops. To stop play Listening 3 7 1 7 Press [n TAPE/CD]. One touch play (When using AC power) When a CD is loaded, press [6 CD]. To pause play Press [6 CD] during play. Press again to resume play. 1 7 To skip tracks Turn [TIME/PRESET TUNE CD SKIP ] clockwise (forward) or counter-clockwise (backward). On the remote control Press [S / 4] (backward) or [3 / T ] (forward). 3 2 CD Elapsed time of track in play Track number in play VOLUME A 7 a b c 10 RQT5189 3 7 7 Label Searching through tracks Press and hold [REW / ­ / Q] (backward) or [R / + / FF] (forward) during play. On the remote control Press and hold [S / 4] (backward) or [3 / T ] (forward) during 3 play. Note Separate this unit from radios and televisions if it causes interference. A CD selection Choose CDs with this mark: (a) Do not · use irregularly shaped CDs (b). [. . . ] If the surfaces are extremely dirty, use a soft cloth dipped in a soapand-water solution or a weak detergent solution. · Never use alcohol, paint thinner, or benzine to clean this unit. · Before using chemically treated cloth, read the instructions that came with the cloth carefully. For a cleaner crisper sound Clean the heads after every 10 hours of use to assure good quality playback and recording. Use a cleaning tape (not included). 19 RQT5189 Reference Timer To check the remaining time Press [SLEEP] once. [. . . ]