User manual PANASONIC RX-D14

[. . . ] 4 Power supply frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 To find the beginning of a music file: . . . . . . . . . . . . . . . . . . . . 20 Using the Earphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Adjusting the Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Advanced Functions Preparation Standard Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Optional Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The SD Multi AV Device can be used as a player only. However, using its Formatting Function, all the data on an SD Memory Card can be erased. Only the first 17 characters are displayed for the title/artist name. If a file is not available, [NO FILE] will be displayed. PRESS MENU TO RETURN 4 TITL1 / TITL2 / TITL3 / TITL4 / TITL5 / TITL6 / MUSIC ARTIST1 ARTIST2 ARTIST3 ARTIST4 ARTIST5 ARTIST6 20 Listening to Music (Music Play) (Cont. ) Ë 1 During playback, the date is not displayed. MP3 is the abbreviation for MPEG1 Audio Layer3. Use the data created with Panasonic Media Manager. Some MP3 or MPEG2-AAC files which were written with Panasonic Media Manager may not be played back. The bit rates (recommended) supported are 64 kbps, 96 kpbs or 128 kbps for both the MPEG2-AAC and MP3 files. Using the Earphone Since there is no internal speaker, the supplied earphone must be used when hearing the sound or making volume adjustment. 1 Plug the earphone terminal into the [ ] jack. If the voice sound is checked with the Earphone on while recording, the volume adjustment function is invalid. MODE/ VOL 1 2, 3 Adjusting the Volume Adjusts the playback audio level for moving picture files, music files, and voice files. - VOL + 1 While playing back, press the [MODE/VOL] Button. The [Volume] indication appears 1. 2 Move the Jog Lever up to increase the audio level or 1 down to decrease it. 3 Press the [MODE/VOL] Button. The [Volume] indication disappears. If the [MODE/VOL] Button or the Jog Lever is left unoperated for five seconds, the [Volume] indication will automatically disappear. 21 Advanced Functions MODE/ VOL 1 1, 2 REC Backlight Compensation Function This prevents a recording subject from being recorded darker in backlight. (Backlight is the light that shines from behind a recording subject. ) - VOL + 1 Set the Operation Mode to [REC>>MPEG4] or 1 PUSH/SET SELECT PLAY MPEG4 PICTURE [REC>>PICTURE] 1. 2 Move the Jog Lever up for about 1 second. The [ª] Indication 2 is displayed. VOICE To Resume Normal Recording Move the Jog Lever up for about 1 seconds. The files recorded in the Voice Record mode (see page 18) are automatically locked. Do not erase the Voice Files recorded with this SD Multi AV Device using other devices. Any file cannot be erased if the write protect switch on the SD Memory Card is set to [LOCK]. If a file is erased on the SD Multi AV Device, the DPOF information set on another camera may also be erased. A still picture file (other than JPEG) that cannot be played back on the SD Multi AV Device may be erased. Erasing many files may take a little time. Wait until the ACCESS Lamp goes out. 4 CARD EDITING ERASE ALL FILES YES FILE PROTECTION DPOF SETTING SLIDE SHOW CARD FORMAT YES YES YES YES PRESS MENU TO RETURN 23 Protecting the file (Lock Setting) 2, 1, 2 3, 4 1, 2 Precious files recorded on a Card can be locked (to prevent accidental erasure). / MENU 1 Play back the file to be locked or let it pause. (l 15, 17 , 19) - VOL + 2 Press the [MENU] Button The [CARD EDITING] screen appears 1. Except for the still picture mode, [DPOF SETTING] and [SLIDE SHOW] is not displayed. 3 3 Move the Jog Lever up or down to select the [FILE 1 PROTECTION], and press down the centre of the Jog Lever 3. The selected file is locked and the [ ] Indication 2 is attached to the selected files. Repeat steps 1 through 3 to lock multiple files. ERASE CARD FILE FILE PROTECTION DPOF SETTING CHECK EXIT ª To release the lock setting: Select [UNLOCK] in Step 3. the [ ] Indication disappears. 2 100-0011 100-0012 100-0013 ª To lock all files: 1 Set the [FILE PROTECTION] on the [CARD EDITING] Menu 4 to [YES]. 2 Select [LOCK ALL FILES] 5 . To unlock all the files, select [UNLOCK ALL FILES]. [. . . ] 5: Even if a Card is formatted, it cannot be used. 5: Either the SD Multi AV Device or the Card may be damaged. 6: Playing back or recording do not function and the screen has frozen. 6: Press and hold the power button until the power is turned off. [. . . ]