User manual PANASONIC RX-D14PCS

[. . . ] please call:1-800-561-5505 or visit us at www. panasonic. ca VQT0B53 Information for Your Safety WARNING TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES AND DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. As this equipment gets hot during use, operate it in a well-ventilated place; do not install this equipment in a confined space such as a book case or similar unit. [. . . ] . A EFFECT Layout OPTION 2 Select [With trim], and press 2 Trim With trim When [Without trim] is selected, the entire image data will always be fitted within the print paper. (Even borderless paper can contain space like the diagram on the left. ) Without trim 29 Settings MENU PRINT SET Adjusting Print Picture Quality Select the INPUT method. Select the picture you wish to adjust, and make the Single Screen Display appear. SET MENU DISPLAY/ CANCEL 1 Select [Picture] under [OPTION] on the MENU screen, DISPLAY/ CANCEL and press . . 2 Adjust the quality, and press 1 7 BASIC 3 5 2 Trim Picture Number Date FUNCTION A EFFECT Layout OPTION 2 COLOR C·BALANCE BRIGHT CONTRAST SHARP AWB Buttons: Item Selection Buttons: Adjust Adjust the depth of the color. Adjust white balance. Adjustments on the TV Screen are approximations. Adjustment on the TV Screen does not affect the printing image. Adjustment of [SHARP] and {AWB] does not change on the TV Screen. The color will not become black and white even if adjusting the depth of the color to [ ]. 1 2 Setting the Layout 7 BASIC 3 5 2 Trim Picture Number Date FUNCTION A EFFECT When selecting the same setting as the layout, MENU moves as the Cursor Buttons of the main unit are pushed. Layout OPTION 1 Select [Layout] under [OPTION] on the MENU screen, Vertical and press . 2 Select [Vertical] or [Horizontal], and press . Layout Horizontal 30 Connecting and Operating with a personal computer Connecting and Operating with a personal computer Operating environment Printer Driver can be installed in a PC/AT compatible personal computer which can run Microsoft® Windows® 98SE/Me/2000 Professional/ XP Home Edition/XP Professional. Compatible machines: IBM-PC/AT compatible personal computer with a Pentium® II, CeleronTM (or compatible CPU) 500 MHz or higher, pre-installed with: Microsoft® Windows® XP Home Edition/Professional, Windows® Me, Windows® 2000 Professional or Windows® 98 Second Edition Graphic display: High Color (16 bit) or more. Desktop resolution of 800X600 dots or higher. If the [Add New Hardware Wizard] screen does not appear, please refer to page 35. 5 Click the [Next] Button. Confirm whether your device is configured to the optimal driver detection setting. 6 6 Check the location to be specified and enter the path as "D:\Win9X-ME" if your system is Windows 98SE. Enter the path as "D:\Win2K-XP" if your system is Windows 2000 (example of D drive assigned as CD-ROM drive). 7 Click the [Next] Button. Re-click the [Next] Button when the search confirmation screen appears. The message [File *****. DLL is not found] can be displayed depending on the environment of PC. Many PCs may install this file on the Hard Disk. Click [Refer] and select [C:\windows\option\cabs]. If your system is Windows 2000, proceed to step 13. 7 8 Click the [Finish] Button. 9 [Add New Hardware Wizard] screen appears again. Click the [Cancel] Button. 10 Restart the computer. 11 [Add New Hardware Wizard] screen appears again. Repeat the steps from 4 through 7. 8 12 Select [No] when the [Add Printer Wizard] screen appears. Select [Yes] to set as the default printer. 13 Click the [Finish] Button. The driver setup is completed. Please read also the "Notes on Installation of Printer Driver" ( carefully. [. . . ] PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY. 53 Others Customer Services Directory (For U. S. A. Only) For Product Information, Operating Assistance, Literature Request, Dealer Locations, and all Customer Service inquires please contact: 1-800-211-PANA(7262), Monday-Friday 9am-9pm Saturday-Sunday 9am-7pm, EST. or send e-mail: consumerproducts@panasonic. com Web Site: http://www. panasonic. com You can purchase parts, accessories or locate your nearest servicenter by visiting our Web Site. Accessory Purchases: 1-800-332-5368 (Customer Orders Only) Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032 (6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST) (Visa, MasterCard, Discover Card, American Express, Check) Product Repairs Centralized Factory Servicenter Panasonic Services Company 1705 N. Randall Road, MAIL TO : Elgin, IL 60123-7847 Attention: SD Products Repair Please carefully pack and ship, prepaid and insured, to the Elgin Centralized Factory Servicenter. [. . . ]