User manual PANASONIC RXD45EB

[. . . ] Operating Instructions Portable Stereo CD System Model No. RX-D45 Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions thoroughly before connecting, operating or adjusting this product. Please keep this manual for future reference. Supplied accessories Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. (As of January 2010) 1 x AC mains lead (K2CZ3YY00005) Operations in these instructions are described mainly using the remote control, but you can perform the operations on the main unit if the controls are the same. [. . . ] Figure A Fuse (5 ampere) Figure B Fuse (5 ampere) 3 Power sources Using the household mains socket To household mains socket Overview of controls O AC mains lead (included) P A B C Connect the AC mains lead firmly to the unit and the household mains socket. Note · The included AC mains lead is for use with this unit only. · The unit is in the standby condition when the AC power supply cord is connected. The primary circuit is always "live" as long as the power cord is connected to an electrical outlet. Using batteries (not included) Press towards the battery. Inner row Outer row 8 3 7 4 6 2 5 1 N M L K J D EF GH I D while inserting · The unit cannot be powered by batteries if the AC mains lead is connected. Disconnect the AC mains lead from the unit to operate on battery power. · Use only alkaline batteries. When to change the batteries When the battery indicator begins flashing, replace all 8 of the batteries. It is also a good idea to replace all the batteries before recording. Note Before any function starts, the battery indicator may flash although the batteries are not drained. The indicator will display its current status when the unit is powered from the household mains socket by using the AC mains lead. Memory back-up When the power supply is interrupted, the current time, timer settings and radio stations you have set are saved if you have inserted back-up batteries (not included). These batteries do not power the unit. A Tape mode/standby switch Unit will be in standby mode. B OPR (operation) indicator The indicator lights up when the unit is turned on. C Clock or timer setting, play timer setting D Speakers These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism. E Disc tray F Tuner (FM/AM) selection, auto preset selection G Disc play or pause H Stop disc playback, MONO selection for FM mode I Disc tray open or close J Play mode function, program function, tuning mode selection K Track skip or search, check program content, preset channel selection, tuning function, time adjustment L Sound equalizer (EQ) selection M Display panel N Volume control O Cassette play operations P Cassette deck Headphone jack (PHONES) Plug type: Ø 3. 5 mm stereo (not included) · Avoid listening for prolonged periods of time to prevent hearing damage. · Excessive sound pressure from earphones and headphones can cause hearing loss. Inner row Outer row 1 4 2 3 When to change the batteries The batteries last about a year. Connect the unit to AC power before replacing the batteries. Before connecting or disconnecting the AC mains lead, press [8/x, STOP/EJECT] to stop the tape and press [TAPE/OFF] to turn the unit off. AM: Adjust the position of the unit. To improve FM sound quality When "FM" is selected Press [FM MODE] to display "MONO". · MONO is also cancelled if the frequency is changed. · Turn off "MONO" for normal listening. 1 2 3 4 5 Press [4/9, CD] and then [8] (stop). Press [­/2] or [6/+] to select your desired track. Repeat steps 3 and 4 to program other tracks. Press and hold [­PGM] in the stop mode. [. . . ] If you are in doubt about some of the check points, or if the solutions indicated in the chart do not solve the problem, consult your dealer for instructions. Specifications AMPLIFIER SECTION Output power 2 W x 2 (RMS 10% THD) Common problems Distorted sound or no sound. A "humming" sound can be heard during play. · An AC mains lead or fluorescent light is near the unit. Keep other appliances and cords away from the unit. [. . . ]