User manual PANASONIC RXD50EG

[. . . ] Please keep this manual for future reference. For optimum performance and safety, please read these instructions thoroughly before connecting, operating or adjusting this product. Unless otherwise indicated, illustrations in these operating instructions are of RX-D55. Operations in these instructions are described mainly using the remote control, but you can perform the operations on the main unit if the controls are the same. [. . . ] 4 Press [5/6] once and then the numeric buttons to select your Repeat steps 3 to 5 to program other tracks. For two-digit track, press [ 10] once then the two digits. For three-digit track (MP3 only), press [ 10] twice then the three digits. To check while programming, press [PROGRAM] twice after "PGM" appears, then press [2/3] or [5/6]. You can view the information of the current track from the display panel. Clear the last track Clear all programmed tracks Press [DEL] in the stop mode. ID3 is a tag embedded in MP3 track to provide information about the track. Titles containing text data that the unit does not support may be differently displayed. RX-D50 Display for MP3 shows only "Elapsed play time". When you try to program more than 24 tracks, "PGM FULL" RX-D55 ("FULL" RX-D50 ) appears. The program memory is cleared when you open the disc tray. The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so playback may not be possible. Choose discs with this mark: · This unit can access up to 99 tracks. This unit can play MP3 files and CD-DA format audio CD-R/RW that have been finalised. It may not be able to play some CD-R/RW due to the condition of the recording. Do not use disc with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. If you have recorded MP3 on the same disc as CD-DA, only the format recorded in the first session can be played. Some MP3s may not be played due to the condition of the disc or recording. Recordings will not necessarily be played in the order you recorded them. Files are treated as tracks and folders are treated as albums. This unit can access up to 999 tracks, 255 albums and 20 sessions. Disc must conform to ISO9660 level 1 or 2 (except for extended formats). [. . . ] Record on the other side of the tape Erase a recorded sound Changes to volume and sound quality do not affect recording. To record on the tape again, cover as shown. The play timer will start at the preset time, with the volume increasing gradually to the preset level. If the erasure prevention tabs have been removed, cover the holes with adhesive tape. [. . . ]