User manual PANASONIC RX-DS11

[. . . ] Your unit may not look exactly the same as illustrated. The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle. [. . . ] This auto off function allows you to turn off the unit in disc or USB mode only after left unused for 10 minutes. The setting is maintained even if the unit is turned off. Repeat function Program clear W USB play or pause RX-D55 Stop disc playback RX-D50 X Music port selection Y Track skip or search, check program content, preset channel selection, tuning function, time adjustment, bass or treble adjustment Remote control: [2/3] or [5/6] Main unit: [­/2] or [6/+] Z Sound virtualizer function a TREBLE selection b Disc and USB play [OK], Confirm selection [OK], Album selection [R/T], [Y/U] have the exact same functions as those of [2/3] or [5/6] c MP3 Information display RX-D55 Input level selection RX-D50 d Input level selection RX-D55 Manual preset selection RX-D50 e Auto preset selection f Cassette play operations g Cassette deck h Display panel i Music port jack j USB port RX-D55 k Speakers These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism. L Disc tray m Disc tray open or close n USB play or pause RX-D55 Music port selection RX-D50 o Sound equalizer (EQ) selection p Remote control signal sensor You can repeat program play or other selected play mode. During RANDOM or 1-ALBUM RANDOM play, you cannot skip to tracks that have been played. During program play (Z see right), or random play (Z see below, "Play Mode function"), you can search only within the track. This function allows you to program up to 24 tracks. Press [R/T, ALBUM] once and then the numeric buttons in the stop mode. Repeat this step to program other tracks. 4 Press [5/6] once and then the numeric buttons to select your Repeat steps 3 to 5 to program other tracks. By main unit only This system can also receive AM broadcasts allocated in 10 kHz steps. After a few seconds the display changes to a flashing display of the current minimum frequency. To tune automatically Press and hold [2/3] or [5/6] until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it finds a station. Auto tuning may not function when there is excessive interference. When the minimum frequency changes, release the button. To return to the original step, repeat the above steps. After the setting is changed, any previously preset frequency will be cleared. The USB connectivity enables you to connect and play MP3 tracks from USB mass storage class. Typically, USB memory devices (bulk only transfer). Before connecting any USB mass storage device to the unit, ensure that the data stored therein has been backed up. [. . . ] Press [# PLAY] to clear the timer indicator from the display. Record on the other side of the tape Erase a recorded sound Changes to volume and sound quality do not affect recording. To record on the tape again, cover as shown. The play timer will start at the preset time, with the volume increasing gradually to the preset level. [. . . ]