User manual PANASONIC RX-DS12

[. . . ] please call:1-800-561-5505 or visit us at www. panasonic. ca VQT0B55 Information for Your Safety WARNING TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES AND DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. As this equipment gets hot during use, operate it in a well-ventilated place; do not install this equipment in a confined space such as a book case or similar unit. [. . . ] You may not be able to enlarge or rotate the characters at the end of the screen. Move the characters after enlarging or rotating them. mn w 2 7 x 3 8 z@ ?· ' . Page 2 Delete Space 1 Hello, How are you?_ 4 Hello, How are you? 5 Hello, How are you? 27 Title Functions B C D PRINT SET AB C PRINT ERROR MENU Print in Sepia Tone The Photo Printer can print pictures in Sepia tone. MENU TITLE DATE DISPLAY/ CANCEL COPY SET A DISPLAY/ CANCEL Select the INPUT method. Display the picture you wish to print and make the Single Screen Display appear. 1 Select [Sepia] under [EFFECT] on the MENU screen, and press A. The MENU contents under [EFFECT] can be also displayed with 1 BASIC aA Illust Type Stamp Sepia ?A FUNCTION A EFFECT Display OPTION D. Press C to bring up the MENU screen. Push the 21 Buttons to select the other picture. [COLOR], [C-BALANCE] and [AWB] cannot be adjusted when [Sepia style] is selected. Titles (Illustrations/Characters) will not have a Sepia tone. 2 Sepia Sepia style Color style 28 Settings Settings MENU MENU TITLE DATE DISPLAY/ CANCEL COPY C B C 7 Settings SET A NUMBER DPOF/ALL SELECT PRINT A ª Set Number of Prints 1 Press A when the picture is displayed. The number of prints increases when pressing A. The Photo Printer can continuously print up to 10 copies of the same image. The number of pages remaining to be printed (including the currently printing page) appears in the lower left corner of the screen. MULTI DISPLAY/ CANCEL 1 BASIC 3 5 2 Trim Picture Number Date FUNCTION A EFFECT Layout OPTION 2 7 3 5 Number 2 1 sheet 1 To Operate with the Buttons on the main unit 1 Select [Number] under [OPTION] on the MENU screen, and press A. 2 Using the 21 Buttons, select number of prints and press A. You can select [1 sheet] to [10 sheets]. Please also read "Notes on Installation of Printer Driver" (l 39) carefully. 4 5 32 Connecting and Operating with a personal computer Installing this printer driver allows the Photo Printer to be used as a fullcolor printer. 4, 6 For Windows Me 1 Turn on the personal computer and install the supplied CD-ROM into the CD-ROM drive. 2 Turn on the Photo Printer. 3 Connect the Printer to the PC using the USB connection cable. The [Add New Hardware Wizard] screen appears. Depending on your PC environment, step 4 and 5 may be skipped. If this is the case, proceed from step 6. 5 4 Click the [Next] Button. 5 Click the [Finish] Button when the Printer Driver Software is detected. 6 [Add New Hardware Wizard] screen appears again. Click the [Next] Button. 7 Select [No] when the [Add Printer Wizard] screen appears. 7 Select [Yes] to set as the default printer. After clicking [Finish], the message [File *****. DLL is not found] can be displayed depending on the environment of PC. Many PCs may install this file on the Hard Disk. Click [Refer] and select [C:\windows\option\cabs]. 8 Click the [Finish] Button. The driver setup is completed. When the Printer Driver Software is not detected, please refer to page 35. Please also read "Notes on Installation of Printer Driver" (l 39) carefully. 8 33 Connecting and Operating with a personal computer 4, 9 Installing the Printer Driver (Cont. ) For Windows 98SE/2000 1 Turn on the personal computer and install the supplied CD-ROM into the CD-ROM drive. 2 Turn on the Photo Printer. [. . . ] 9. 5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 PANASONIC SD Products Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as "the warrantor") will, for the length of the period indicated on the chart below, which starts with the date of original purchase ("warranty period"), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or replace will be made by the warrantor. Product or Part Name SD Multi AV Device, SD Mobile Printer, Digital Photo Printer (except items listed below) CMOS Camera Assembly Rechargeable Battery Pack (Non-rechargeable batteries are not warranted), SD Memory Card, AC Adaptor USB Reader-Writer (in exchange for defective item) Parts One (1) year Six (6) months Ninety (90) days Labor Ninety (90) days Ninety (90) days Not Applicable During the "Labor" warranty period there will be no charge for labor. During the "Parts" warranty period, there will be no charge for parts. You must carry-in or mail-in your product during the warranty period. [. . . ]