User manual PANASONIC RX-EX1PC

[. . . ] Portable Stereo CD System Operating Instructions Model No. RX-EX1 Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. P PC RQT5671-2P Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. The model number and serial number of this product can be found on either the back or the bottom of the unit. [. . . ] (Wipe with a soft, dry cloth. ) ·use CDs printed with label printers available on the market. 10 RQT5671 CDs Y Other modes of play Preparation: Press [ ] to switch to CD mode. Remote control only Direct access play Starts normal play from a selected track Select the track with the numbered buttons. For tracks numbered 10 and over, press [ 10] then the two digits. Repeat play Plays a track or all tracks repeatedly Press [CD PLAY MODE] before or during play to select the mode. Each time the button is pressed : One track repeated : All tracks repeated PLAY RE FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO RANDOM No display (cancelled) Press [CD] to start play if in the stop mode. To repeat selected tracks PLAY RE FADER SLEEP Start program play ( page 12). Press [CD PLAY MODE] to select " EQ ON ". 1PGM REC ALL 1-REC ST MONO RANDOM To cancel Press [CD PLAY MODE] until " " and " " are cleared. The mode is also cancelled if the CD tray is opened. PLAY RE FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO Random play Plays the tracks once each in random order Press [CD PLAY MODE] before or during play to ". select " Each time the button is pressed RANDOM No display (cancelled) Press [CD] to start play if in the stop mode. To cancel Press [CD PLAY MODE] to clear " ". If canceled during play, play continues to the end of the disc. The mode is also cancelled if the CD tray is opened. ·Random play does not work when " " is displayed (press and hold [ PGM/ CLEAR ] first). ·Tracks cannot be selected with the numbered buttons. ·You cannot skip to tracks already played. ·Search can be done within the track in play only. 11 RQT5671 Listening CDs Y Program play: Select up to 36 tracks to play in the order you choose Preparation: Press [ ] to switch to CD mode. Remote control only Press [PGM/ CLEAR]. Enter the track number with the numbered buttons. Listening For tracks numbered 10 and over, press [ 10] then the two digits. Repeat this step to program the tracks in the required order. Press [CD]. All the tracks are played in the selected order. The program remains intact even if play is stopped or the unit is turned off. "Cd-P" appears when play is stopped to indicate the contents are in the memory. PLAY RE FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO To cancel Press and hold [PGM/ CLEAR] in the stop mode until "CLEAR" is displayed. The mode is also canceled if the CD tray is opened. RANDOM "FULL" is displayed PLAY RE FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO If more than 36 tracks have been programmed. RANDOM "-- --:-- --" is displayed If the total play time of the program exceeds 100 minutes. You can still program and play tracks. To check the contents of the program While stopped Press [REW/­/ ] or [ /+/FF]. Each time one of the buttons is pressed, a track and its order in the program are displayed. Program play does not work when " " is displayed (press [CD PLAY MODE] to clear it) ( page 11). Search can be done within tracks only. 12 RQT5671 The Radio: manual tuning Press [POWER, ] to turn the unit on. Press [TUNER BAND] to select FM or AM. Each time the button is pressed: AM FM Press [TUNE MODE] to select the manual tuning mode. Make sure that " " is not displayed. Press [REW/­/ station. " ] or [ /+/FF] to select a " is displayed during FM stereo broadcasts. Turn [­ "VOLUME#+] to adjust the volume. # FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO RANDOM Auto-tuning Press and hold [REW/­/ ] or [ /+/FF] until the frequency starts changing rapidly. (Interference may also cause it to stop. Start auto-tuning again if this occurs. ) To stop auto-tuning Press [REW/­/ ] or [ /+/FF]. FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO RANDOM FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO RANDOM Using auto scan Remote control only FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO RANDOM You can search for a station by listening to all tuned-in stations for 8 seconds each. 1 s Press [TUNER] to select "FM" or "AM". [. . . ] Check the batteries are inserted correctly. 8 Replace the batteries if they are worn. 8 Use the power button on the main unit if you are using batteries to power the unit. 6 8 Remote control The remote control doesn't work. [. . . ]