User manual PANASONIC S125MW1E5

[. . . ] Operating Instructions Air-to-Water Heatpump ENGLISH Before operating the unit, read these operating instructions thoroughly and keep them for future reference. 50 ~ 61 62 ~ 73 74 ~ 85 86 ~ 97 TALIANO ● Connectable outdoor unit lineup This booklet is the operating instructions for indoor unit. Regarding the outdoor unit, see the operating instructions supplied with the outdoor unit. Indb 1 2015-9-15 10:12:19 Thank you for purchasing this Panasonic product. [. . . ] ) During cooling operation, use sunshades, blinds or zz curtains to prevent direct sunlight from entering the room. Zz (A luck of water flow will impair the performance of the unit. 12) To zz prevent conditioned air from escaping, keep windows, doors and any other openings closed. Menu button Displays the menu screen LCD screen Cross key buttons Selects an item. Enter button Fixes the selected content. OFF *1  When the heat capacity for Air-to-Water is insufficient, output signal is sent to the external device. *2  When the notice is input from the external device, the icon appears on the wired remote controller. Water out temperature The indoor unit is stopped or slight blow operation is in process. It is able to set Room Temperature from thermo sensor (RC thermo or remote sensor thermo). ρ To return to the previous screen Press . ρ To return to the top screen Press 2 times. „„Clock „„Clock type „„ Operation lock When applying a power on for the first time, it is necessary to initialize the remote controller for Air-to-Water unit. Please refer to the installation instructions or consult the contractor. *  The Air-to-Water function is not applicable to the feature list No. Clock type AM/PM Change [ ] Confirm 8:30PM (THU) AM/PM 24 h → → (Press 2 times to finish. )  Operation lock 4 Select the type of lock and set to [ ]. Operation lock Lock all keys Lock START/STOP Lock MODE Lock SET TEMP. „  To change the setting 2 Change the temperature setting  To stop (The operation indicator turns off) Press (In TANK mode, only “SET TEMP. „ 2 Change the setting Press  To change the setting  To stop (The operationAIR-CONDITIONING off) indicator turns MODE COOL 20:30 (THU) 7 SET TEMP. Operation indicator Set temperature Press (When the cursor is not visible. „ 2 Select the item to set Press  To change the setting  To stop (The operation indicator turns off) 3 Change the setting Press Operation indicator 8 OI_00_271368_EU. „ ℃ Set temperature Press (When the cursor is not visible. [. . . ] Ͽ You also report if the inspection mark and the letters E, F, H, L, P in combination with numbers appear on the LCD of the remote controller. Never repair the Air-to-Water unit by yourself since it is very dangerous for you to do so. Symptom Sound like streaming water is heard during operation or after operation. Cracking noise is heard during operation or when operation stops. [. . . ]