User manual PANASONIC S70

[. . . ] Matsushita or any of its distributors will not be liable for any damage suffered by Licensee arising from or in connection with Licensee's use of the Software. Article 1 License Licensee is granted the right to use the Software, including the information recorded or described on the CD-ROM, instruction manuals, and any other media provided to Licensee (collectively "Software"), but all applicable rights to patents, copyrights, trademarks and trade secrets in the Software are not transferred to Licensee. Article 7 Export Control Licensee agrees not to export or re-export to any country the Software in any form without the appropriate export licenses under regulations of the country where Licensee resides, if necessary. Article 2 Use by a Third Party Licensee may not use, copy, modify, transfer or allow any third party, whether free of charge or not, to use, copy or modify the Software, except as expressly provided for in this Agreement. Article 8 Termination of License The right granted to Licensee hereunder will be automatically terminated if Licensee contravenes any of the terms and conditions of this Agreement. Upon termination hereof, Licensee must destroy the Software and related documentation together with all the copies thereof at Licensee's own expense. Article 3 Restrictions on Copying the Software Licensee may make a single copy of the Software in whole or in part solely for back-up purpose. Article 4 Computer Licensee may use the Software only on one computer, and may not use it on more than one computer. Article 5 Reverse Engineering, Decompiling or Disassembly Licensee may not reverse engineer, decompile, or disassemble the Software, except to the extent either of them is permitted under law or regulation of the country where Licensee resides. Matsushita, or its distributors will not be responsible for any defects in the Software or damage to Licensee caused by Licensee's reverse engineering, decompiling, or disassembly of the Software. 2 VQT0T50 Contents End User License Agreement . . . . . . . . . . . . 2 Image stabilizer function . . . . . . . . . . . . . . . . . . [. . . ] (Selected number of pictures can be printed as you set the number of prints with the printer supporting DPOF. ) The function can be cancelled by setting the number of pictures to [0]. To complete the settings Press the [MENU] button. To return the total number of pictures to [0] PLAY SETUP PLAY MODE LOCK DPOF SET NO SET CANCEL ALL SETUP ENTER EXIT MENU Press the menu button, then use the cursor button to select [ PLAY SETUP]#[ DPOF SET]# [CANCEL ALL]. (P26) When the confirmation message appears, use the cursor button to select [YES], then press the button in the center. 66 VQT0T50 What is DPOF? DPOF stands for Digital Print Order Format. This enables picture printing information to be written onto an SD card so that it can be used on a system supporting DPOF. The DPOF setting can be established for up to 999 scenes. DPOF setting made on another camera may not be recognized by this unit. Please perform the DPOF settings on this unit. You cannot add the recording date to pictures to be printed with the DPOF settings. If the write protection switch on an SD card is set to [LOCK], the DPOF setting cannot be set. (P15) PictBridge This is for printing pictures by directly connecting to the printer. To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer. ) ¬ Connect this unit to the AC adaptor. ¬ Rotate the mode dial to select . 1 Open the terminal cover, then firmly plug one end of the USB cable 1 (supplied) into the unit's USB terminal and the other end into the terminal on the printer. 1 Insert the plugs as far as they will go. The images recorded on the SD card are displayed as thumbnails. In this case, you can play them back with their original aspect ratio by changing the menu setting. (Depending on the settings of the TV, the images may not be shown correctly. Refer to the operating instructions of the TV. ) SETUP BEEP SOUND LCD AI LCD SET TV ASPECT SETUP ENTER 16:9 4:3 EXIT MENU 2/2 Press the menu button, then use the cursor button to select [ SETUP]#[ TV ASPECT]#[4:3]. (P26) Examples showing images with a 16:9 aspect ratio displayed on the TV screen Aspect ratio of TV screen 4:3 16:9 3 1 16:9 [ TV ASPECT] 4:3 2 4 1 The images are elongated vertically. 2 Black bands appear at the top and bottom of the screen. 4 Black bands appear at the top, bottom, left and right of the screen. When watching the recorded motion pictures on TV Depending on the TV connected, the sides of the images (the part outside the dotted line) being played may not appear. We recommend widening the recording range of the objects you want to record beforehand. 1 16:9 screen 2 4:3 screen 1 2 3:42 PM DEC 15 2005 3:42 PM DEC 15 2005 16:9 4:3 To display the on-screen information on the TV The information displayed on the LCD monitor (operation icon and mode indication, etc. ), date and time (P28) can be displayed on the TV. Press the [OSD] button on the remote control. OSD DATE/ TIME START/ STOP Press the button again to erase the OSD information. The LCD monitor display does not change. 71 VQT0T50 Using this unit's recorded data on other devices This is for copying recordings from a DVD recorder's SD card slot onto its hard disk. To prevent accidental deleting of images recorded, or when the SD card is full, record the files on the SD card to the DVD recorder's hard disk or DVD-RAM. Depending on the type of DVD recorder used, it may not be possible to copy motion pictures (MPEG2) recorded with this unit onto a hard disk, etc. [. . . ] 47 Manual Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 MEGA OIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Menu list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]