User manual PANASONIC SA-XR70

[. . . ] Dear customer Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. Note: "EB" on the packaging indicates the United Kingdom. Operating Instructions SA-XR70 Table of contents Before use Caution for AC Mains Lead. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Sound will now come from the surround back speaker. The 6. 1CH DECODING mode cannot be used when the following input signals are supplied: · When only the center channel signals are input. Notes on sound modes Dolby Pro Logic x, Dolby Pro Logic , DTS NEO:6 and SFC modes remain in effect until you change them. · To cancel : Press [STEREO/2CH MIX, OFF]. The 2CH MIX mode remains in effect until you change input mode or turn off the unit. · To return to surround sound: Press [STEREO/2CH MIX, OFF]. When input is PCM with sampling frequencies of 192, 176. 4 (COAXIAL1, HDMI), 96, or 88. 2 kHz: · You cannot add surround effects with Dolby Pro Logic x, Dolby Pro Logic , DTS NEO:6 or SFC. When neither the center nor surround speakers are selected in the speaker settings: · You cannot use Dolby Pro Logic x, Dolby Pro Logic , DTS NEO:6 or SFC. When the surround back speaker is not selected in the speaker settings: · You cannot use 6. 1CH DECODING mode. Notes on HDMI When the input signal is multi-channel DVD-Audio: · Speaker settings are ineffective. The speaker settings selected on this unit need to be set on the DVD player or DVD recorder. · You cannot use Dolby Pro Logic x, Dolby Pro Logic , DTS NEO:6 or SFC. · You cannot use 6. 1CH DECODING mode. With a source for which down-mixing is prohibited: · The 2CH MIX mode cannot be used. · Play may not be normal if SPEAKERS B has been selected or all the speakers have been set to off and you are listening through headphones. 17 Control guide Main unit Standby indicator [^] When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on. [SPEAKERS, A, B, BI-WIRE] For selecting speakers A or B. To use BI-WIRE, press [A] and [B] at the same time. Turning the speakers off automatically engages the STEREO/2CH MIX mode (when listening through headphones, for example). [% DIGITAL, % EX/PL x, % PL , DTS 96/24, DTS-ES, DTS, DTS NEO:6] Lights to indicate the source's input signal and decoding format used. % DIGITAL: Dolby Digital sources % EX/PL x: Dolby Digital Surround EX sources or Dolby Pro Logic x decoder is being used. % PL : Dolby Pro Logic decoder is being used. DTS 96/24: DTS 96/24 sources DTS-ES: DTS-ES discrete or matrix sources DTS: DTS sources DTS NEO:6:DTS NEO:6 matrix decoder is being used. [MULTI CONTROL] Press to enter Multi control, and use [INPUT SELECTOR] to select/ enter. Standby/on switch [8] Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. [INPUT SELECTOR] For selecting input. Selects/Enters each setting in Multi control. [BI-AMP] Lights when the BI-AMP function is activated. [VOLUME] Volume control. MULTI CONTROL INPUT SELECTOR VOLUME SPEAKERS A B BI-AMP PUSH ENTER Remote control signal sensor [VCR 2] For a video camera, etc. BI-WIRE ^ 8 6. 1CH DECODING DOWN UP VCR 2 PHONES S-VIDEO IN VIDEO IN L AUDIO IN R [6. 1CH DECODING] For turning on the 6. 1 channel decoding mode. When using this mode the indicator lights. [HQ SOUND MODE] Lights when using HQ sound mode. [HDMI] Lights when the signals have been established with a HDMI connection. [PHONES] Headphone jack Plug type: 6. 3 mm stereo · Avoid listening for prolonged periods of time to prevent hearing damage. · Turn the speakers off when using the headphones. [BASS SYNTHESIZER] For turning on the bass synthesizer mode. [. . . ] Turn the unit off, disconnect the AC mains lead, and consult your dealer. The equipment connected by the HDMI cable is not compatible with the unit's copyright protection technology. The unit has received a signal for a picture format that is incompatible with the HDMI connection. Check the settings of the connected equipment. [. . . ]