User manual PANASONIC SA-AX710

[. . . ] page 35 If the display lights up when the unit is turned off, turn the demo function off. page 10 Operations in these instructions are described mainly for the remote control, but you can do the operations on the main unit if the controls are the same. Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] + 3 While pressing [*/h REC], press [SD, -HI-SPEED CD q SD] to start recording. · Do not open the lid while recording. This may cause recording to stop or the data may not be correctly recorded onto the SD card. If you accidentally open the cover when recording from the radio, recording stops. To pause While pressing [*/h REC], press [SD, -HI-SPEED CD q SD]. The SD pauses and the cassette tape or radio continues playing. ("REC" flashes on the display. ) Press again to restart recording. To display the remaining time on the SD Press [DISPLAY, ­DIMMER] several times. Note n Adding track marks on the SD You can add track marks where the track changes on the cassette tape or radio. These marks separate tracks in a recording. They can be added automatically or manually during recording. During recording "TR MARKING" is shown on the display and a track mark is added. RQT8046 You can use SD cards with capacities between 8MB and 1GB on this unit. ( page 6) 26 Recording from SD/the radio to cassette tape Preparation Insert the SD card ( page 8) or the cassette tape. 3 Press [u 2/REW, i 1/FF] to select the track to be moved and press [LIST/ENTER]. During play, the current track is selected. 4 Press [u 2/REW, i 1/FF] to select the new 5 Press [LIST/ENTER]. position and press [LIST/ENTER]. When "CARD Writing" stops flashing editing is complete. 28 RQT8046 Formatting a card -- CARD FORMAT Formatting erases all the contents of the card and not only the tracks recorded using this unit. Once erased, the contents of the card are lost and cannot be restored. · When a card is formatted using this unit, it may not be possible to use it on other equipment. To create a new playlist -- PL CREATE 4 Press the numbered buttons to select the track. · Example: To select 12 [ 10] è [1] è [2] To select 123 [ 10] è [ 10] è [1] è [2] è [3] · Repeat this step to select other tracks (up to 99 tracks). 1 During stop Select "CARD FORMAT?". Every time you press the button: 5 Press [LIST/ENTER]. 6 Enter the name ( page 30) and press [LIST/ENTER]. When "CARD Writing" stops flashing editing is complete. To play a playlist ( page 16, Title search) 2 Press [LIST/ENTER]. 3 Press [LIST/ENTER]. · When "CARD Writing" stops flashing editing is complete. · Do not open the card lid until "NO TRACK" is displayed. · Formatting may take time depending on the type of card. To erase playlists -- PL ERASE 5 Press [LIST/ENTER]. and press [LIST/ENTER]. Editing playlists -- PLAYLIST Playlists You can arrange recorded tracks in the order you want to play them. Track Playlist Track Track Track Track Track When "CARD Writing" stops flashing editing is complete. To add tracks to/erase tracks from playlists -- PL EDIT 4 Press [u 2/REW, i 1/FF] to select the playlist and press [LIST/ENTER]. To add tracks 1 Press [u 2/REW, i 1/FF] to select where to add the track. The track currently in this position becomes the next track in the order of play. 2 Press the numbered buttons to select the track. [. . . ] · Before using chemically treated cloth, read the instructions that came with the cloth carefully. When moving the unit 1 2 3 Remove all discs, card, and tape. Disconnect the AC power supply cord after "GOODBYE" disappears from the display. Press [POWER ^/I] on the main unit to turn it off. For a cleaner, crisper sound (cassette deck) Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included). RQT8046 Reference 41 Specifications n AMPLIFIER SECTION FTC output power both channels driven 10 % total harmonic distortion 60 Hz to 3 kHz (Low channel) 35 W per channel (6 ) 3 kHz to 16 kHz (High channel) 35 W per channel (6 ) Total Bi-Amp power 70 W per channel RMS output power both channels driven 10 % total harmonic distortion 1 kHz (Low channel) 40 W per channel (6 ) 8 kHz (High channel) 40 W per channel (6 ) Total Bi-Amp power 80 W per channel Output impedance HEADPHONE 16 to 32 n SD SECTION Sampling frequency Coding system Number of channels 32 kHz (LP), 44. 1 kHz (SP, XP) SD audio playback (AAC/MP3/WMA) SD audio record (AAC) 2 channel (stereo) n OTHER CDèSD Recording speed: Maximum 4 times (LP) n SPEAKER SECTION (Front speakers SB-PM71) Type Speaker units Woofer Tweeter S-tweeter Impedance High Low Input power (IEC MAX) High Low Output sound pressure Crossover frequency Frequency range Dimensions (WxHxD) Mass 3 way, 3 speaker system (Bass-Ref) 10 cm (4") cone type 6 cm (2 3/8") cone type Piezo type 6 6 40 W 40 W 84 dB/W (1. 0 m) 3 kHz, 10 kHz 50 Hz to 50 kHz (­16 dB) 60 Hz to 45 kHz (­10 dB) 145 mm x 250 mm x 232 mm (5 23/32" x 9 27/32" x 9 5/32") 2. 4 kg (5. 3 lbs) n FM TUNER SECTION Frequency range Sensitivity S/N 26 dB Antenna terminals Preset stations 87. 9 MHz to 107. 9 MHz (Default) (200 kHz steps) 87. 5 MHz to 108. 0 MHz (100 kHz steps) 1. 50 µV (IHF) 1. 70 µV 75 (unbalanced) 15 n AM TUNER SECTION Frequency range 520 kHz to 1710 kHz (10 kHz steps) Sensitivity S/N 20 dB at 1000 kHz 560 µV/m Preset stations 15 n CASSETTE DECK SECTION Track system 4-track, 2-channel Heads Record/playback Solid permalloy head Erasure Double gap ferrite head Motor DC servo motor Recording system AC bias 100 kHz Erase system AC erase 100 kHz Tape speed 4. 8 cm/s (1-7/8 ips) Overall frequency response (+3, -6 dB) at DECK OUT Normal 35 Hz to 14 kHz Wow and flutter 0. 10 % (WRMS) Fast forward and rewind time Approx. [. . . ]