User manual PANASONIC SA-AX730

[. . . ] 2 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Step 1 Home Theater connections. . . . [. . . ] You can choose a level between 0 (the center speaker is dominant) and 7 (center sound is spread out). The default level is 3. EFFECT ­ w + q PANORAMA Sound is spread out more so you feel like you are surrounded by music. EFFECT ­ w + q EFFECT ­ w + q Select "DIMEN". Adjust the effect. Select "C-WDTH". Adjust the effect. Select "PANORAMA". Select "ON" or "OFF". You can adjust the effect of MUSIC with the center image control. Center Image Control ­ C-IMG This adjustment helps you realize a more natural sound image when listening to music. Move sound out into the front speakers to improve the overall front image, or add sound to the center speaker to fix the center image. You can choose a level between 0 (the center speaker is dominant) and 5 (center sound is spread out). The default level is 3. EFFECT ­ w + q Select "C-IMG". You can adjust the sound field by adjusting the level of the speakers and effect. These adjustments can be made for each SFC mode. To adjust the speaker level LEVEL ­ w + q To adjust SFC effect Step 4 RQT7525 EFFECT ­ w + q Select speaker channel. Adjust the level. C, RS, SB and LS: ­10 dB to +10 dB SW: ­ ­ ­ (off) MIN 1 ­ 19 MAX Adjust the effect. SFC effect can be adjusted between EFFECT 1 (minimum) and EFFECT 10 (maximum). The factory setting is EFFECT 5 for each mode. C RS LS SW When 6. 1CH DECODING is on: C RS SB LS SW Output is only from the speakers selected in the speaker settings. Listening to multi-channel source in stereo (2CH MIX mode) When multi-channel sources are played in this mode, the sounds intended for the other speaker channels are played through the front speakers. STEREO/ 2CH MIX OFF · To cancel: Press [STEREO/2CH MIX, OFF]. If the unit does not automatically recognize Dolby Digital Surround EX or DTS-ES and output is 5. 1 channels: Press [6. 1CH DECODING] to switch the mode on manually. When using this mode the indicator lights. [MULTI-SOURCE RE-MASTER] For selecting a re-master mode. When using this mode the indicator lights. [TUNE 2, 1] For tuning the radio and selecting preset stations. Press and hold until the frequency starts scrolling to start automatic tuning. Tuning stops when a station is found. Display · When you turn the dimmer to "ON" or turn HQ sound mode on, the following indicators will dim. [­SPEAKERS­ , , BI-WIRE ] Speaker indicators :Sound is output from speakers connected to the front A, surround, and center terminals. : Sound is output only from speakers connected to the front B terminals. : Sound is output from speakers connected to the front A and B terminals. BI-WIRE : Sound is output from speakers connected by Bi-wiring. [TUNED, ST, , MONO] Radio indicators TUNED: A station is tuned. MONO: Lights when using the monaural mode. [SFC, CENTER FOCUS, 2CH MIX, MULTI REAR] SFC: Lights when using an SFC mode. CENTER FOCUS: Lights when using the center focus mode. 2CH MIX: Lights when playing a multichannel source in 2CH MIX mode. MULTI REAR: Lights when using the multi rear surround mode. [­DIGITAL INPUT­, L, C, R, S, LS, SB, RS, LFE] Program format indicators Show the channels contained in the digital input signal. [. . . ] - Using speakers with an impedance lower than that rated for this unit. - Straining of the speakers through excessive volume or power. - Using the unit in a hot environment without proper ventilation. Consult your dealer if the problem occurs again after switching the unit on. [. . . ]