User manual PANASONIC SABT235

[. . . ] Easy Setting Guide The order of setting Blu-ray Disc Home Theater Sound System Model No. SC-BT235 1 1 Prepare the speakers See below 2 3 Slide into the groove. Place the speakers See below 3 cable between the ridges. Connect the cables See over 4 Turn on the main unit See over Easy setup See Easy setup screen Prepare the speakers Front speaker Step 1 Step 2 Position the Insert the wire fully, taking care not to insert beyond the wire insulation. [. . . ] : White : Blue line White PUSH! FRONT/AVANT CENTER/CENTRE SURROUND/AMBIOPHONIE Blue line Recommended Front speakers (L, R) Surround speakers (LS, RS) Speakers Front speakers Center speaker Surround speakers Refer to the rear label of the speaker before connecting the corresponding cable. Verify the type of speaker with the label on the rear of the speaker. e. g. , 60 120 VQC7693 F0210RE0 3 Connect the cables For detailed information, refer to the operating instructions. Other connection Broadband Network Connections (Optional) By connecting this unit to the network, you can use the BD-Live and VIERA CAST features. Connect the cables by color or by the numbers indicated in the illustration to the appropriate terminals on the rear panel of the unit. PURPLE GREEN RED WHITE GRAY BLUE FM indoor antenna (included) Adhesive tape Main unit (10BASE-T/ 100BASE-TX) DIGITAL AUDIO IN L OPT OPTICAL 5 6 ENTER LAN 1 2 2 1 6 5 6 6 R 3 L SUBWOOFER CENTER FRONT 4 3 R 3 L SURROUND AV OUT LAN R Shielded LAN cable (not included) (ARC) VIDEO OUT AUX FM ANT (75) Main unit's speaker terminals (rear panel) HDMI cable (not included) (Recommended for highest quality picture) Video cable*1 (included) VIDEO IN AV IN *1 Make sure that this video connection is made to view photos/ videos from the iPod/ iPhone. Audio connection For best quality audio, use the HDMI cable (with an ARC compatible TV) or an optical digital audio cable. If your TV does not support the above, use the audio cable. Modem (Broadband) · Provided by ISP Broadband router, etc. TV L Audio cable (not included) AUDIO OUT R OPTICAL OUT Optical digital audio cable (not included) 4 1 AC IN Turn on the main unit Connect the AC power supply cord Connect the AC power supply cord to the main unit before connecting to the household AC outlet. 2 Turn on the TV 3 Turn on the main unit TV INPUT VOL 4 The Easy setup starts Turn on your TV and select the appropriate video input mode (e. g. , VIDEO 1, AV 1, HDMI, etc. ) to suit the connections to this unit. Press [ ] to turn on the main unit. The on screen display will guide you through the steps. *2 Easy setup Would you like to start easy setup?Voulez-vous amorcer le Réglage facile ?¿Quiere empezar la Fácil Setup?Yes/Oui/Sí OK Main unit AC power supply cord (included) To a household AC outlet (AC 120 V, 60 Hz) 1@. [. . . ] Mon-Fri 9 am­9 pm (EST) Lunes-Viernes Sat-Sun 10 am­7 pm (EST) Sabado-Domingo If you have any questions contact: 1-800-211-PANA (7262) [. . . ]