User manual PANASONIC SABT330

[. . . ] Operating Instructions Blu-ray Disc Home Theater Sound System Model No. SC-BT730 SC-BT330 SC-BT230 The illustration shows the image of the unit SC-BT730. Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] Also when the connection or settings are changed, repeat this procedure. TV TV speakers are active. The volume of this unit is set to "0". Audio output is 2-channel audio. When switching between this unit's speakers and TV speakers, the TV screen may be blank for several seconds. Setting the audio link Setting the audio link with the TV With the remote control; Select the actual TV audio connection on the main unit. 1 Press [START] and press [3, 4] to select "Other Functions" and press [OK]. 2 Press [3, 4] to select "Setup" and press [OK]. 3 Press [3, 4] to select "TV / Device Connection" and press [OK]. 4 Press [3, 4] to select "TV Audio Input". 5 Press [2, 1] to switch "AUX", "ARC" or "DIGITAL IN 1". Whenever the connection or settings are changed, reconfirm the points above. Automatic input switching (Power on link) When the following operations are performed, the television will automatically switch the input channel and display the corresponding action. When the TV is off, the TV will automatically turn on. jWhen play starts on the unit jWhen an action that uses the display screen is performed (e. g. , Direct Navigator screen) When you switch the TV input to TV tuner mode, this unit will automatically switch to "AUX"*1, "ARC"*1 or "D-IN 1" (DIGITAL IN 1)*1 or "D-IN 2" (DIGITAL IN 2)*2. This function does not work when the iPod/iPhone selector is chosen. ( 33) Setting the audio link with the STB With the remote control; Select the STB input channel on the TV. 1 Press [EXT-IN] to select "D-IN 2". 2 Press [STATUS] to select "CABLE/SAT AUDIO ON". If the input channel of the STB on the TV is changed or if you want to change the device allocated for the linked operations, select "CABLE/SAT AUDIO OFF" in step 2 above and then repeat steps 1 to 2. Automatic lip-sync function (for HDAVI Control 3 or later) Delay between audio and video is automatically adjusted, enabling you to enjoy smooth audio for the picture ( 37, "Audio Delay"). This function works only when "BD/DVD", "SD", "AUX"*1, "ARC"*1, "D-IN 1" (DIGITAL IN 1)*1 or "D-IN 2" (DIGITAL IN 2)*2 is selected as the source on this unit. *1 "AUX", "ARC" or "D-IN 1" works depending on the setting in "Setting the audio link with the TV". *2 "D-IN 2" works depending on the setting in "Setting the audio link with the STB". VIERA Link "HDAVI Control", based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers' equipment that supports HDMI CEC cannot be guaranteed. This unit supports "HDAVI Control 5" function. "HDAVI Control 5" is the newest standard (current as of December, 2009) for Panasonic's HDAVI Control compatible equipment. [. . . ] This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold "as is". Mail-In Service For assistance in the U. S. A. and Puerto Rico in obtaining repairs, please ship the product prepaid to: Panasonic Exchange Center 4900 George McVay Drive Suite B McAllen, TX 78503 panacare@us. panasonic. com When shipping the unit, carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. [. . . ]