User manual PANASONIC SA-DX930

[. . . ] In particular, do not place tape decks or CD/DVD players on this unit as heat radiated from it can damage your software. NO Radio functions The radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Preset tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 RDS broadcasts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 To display RDS information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 PTY search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 EON tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 PTY displays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Reference Making a recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Timer function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 The HELP function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Troubleshooting guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 2 RQT5818 Supplied accessories Please check and identify the supplied accessories. AC mains lead. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety precautions Placement Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit's service life. Do not place heavy items on the unit. Voltage For Continental Europe (RJA0019-2K) For the United Kingdom (VJA0733) Do not use high voltage power sources. [. . . ] The DSP may interfere with radio reception. You can turn it off if this occurs (\ page 22). Output is in stereo when you turn the DSP off so sound is only heard through the front speakers. Note A DSP SOUND MODE ¡PCM with a sampling frequency of 44. 1 kHz is the digital signal format normally found on CDs. Some DVDs also use this format but often with a higher sampling rate. ¡This unit cannot process other digital signal formats, such as PCM signals with sampling frequencies of 96 kHz and 192 kHz and MPEG. ¡SA-DX750 cannot process DTS signals. L SPEAKERS A R A STEREO mode SOUND MODE STEREO B DSP SOUND MODE Use this mode to play digital or analogue stereo sources or to play surround sources through two speakers. When surround sources are played in this mode, the sounds intended for the other speaker channels are played through the front speakers. B SURROUND mode L LS SPEAKERS A DIGITAL C R LFE RS Select this mode when you are playing a digital surround source [Dolby Digital or (SA-DX930 only) DTS] or an analogue source that is recorded with Dolby Surround (VCR, for example). SOUND MODE SURROUND C Changing the recognition mode C SA-DX930 DIGITAL INPUT In rare cases, the unit may have trouble recognizing the digital signals on discs. With the PCM signals on CDs, this may cause the beginning of a track to be cut off. (SA-DX930 only) With DTS, the signals may not be recognized at all. This mode does not need to be changed under normal circumstances. LFE (Low Frequency Effect): Deep-bass effect. Enjoying the sounds SPEAKERS B DVD 6CH INPUT A To switch between DVD 2 channel and 6 channel input SA-DX930 There may be times when you need to use analogue input for DVD, such as to enjoy sources recorded with MPEG, linear PCM and multiple channel linear PCM. Select the analogue input mode to suit the source. DVD 6CH: For multiple channel audio. Press [DVD 6CH INPUT]. A DVD 6CH INPUT Each time you press the button: DVD , DVD 6CH / Input switches automatically to DVD if you press this button while another source is selected. The indicator lights when you select "DVD 6CH". Once you have set the mode, that mode is engaged whenever you select "DVD". Note B SPEAKERS B SPEAKERS B ¡DVD 6CH INPUT only works when SPEAKERS A is on and SPEAKERS B is off. ¡You cannot use any of the DSP sound modes while DVD 6CH INPUT is on. ¡Speaker settings (\ page 13) are ineffective while DVD 6CH INPUT is on. Change the settings on the DVD player if necessary. B To use SPEAKERS B SA-DX930 Press [B]. If you don't want sound coming from the speakers connected to the A terminals, press [A] to turn them off. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. SA-DX930 Manufactured under license from Digital Theater Systems, Inc. [. . . ] ¡Ensure the power cord is connected. Ref. Pages 9 No sound. ¡Turn the volume up. ¡Check connections to speakers and other equipment. ¡Change the DIGITAL input setting to suit the type of connection you have made. ¡Check that the digital signals can be decoded by this unit. [. . . ]