User manual PANASONIC SA-EN38

[. . . ] Operating Instructions CD Stereo System Model No. SC-EN38 Dear customer Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. If you have any questions contact In the U. S. A. : 1-800-211-PANA (7262) In Canada: 1-800-561-5505 These instructions are applicable to the following systems. [. . . ] Remote control To pause track Main unit To skip a track (During play/pause) To search the current track (During play/pause) Note When you select another source or turn the main unit off, the iPod turns off. press and hold press and hold USB cable (not included) Note PC Sync will function only when the main unit is in Standby or On condition. Recording and operating problems may occur on some computer systems. Please note that Panasonic and Panasonic dealers cannot be held liable for any lost audio data or other direct or indirect damage except in cases of intentional or gross negligence. iPod is a trademark of Apple Inc. , registered in the U. S. and other countries. RQTV0288 7 External unit (continued) The remote control and main unit are factory-set to "REMOTE 1" mode. If your remote control affects other equipment during operation, you can switch to operate in "REMOTE 2" mode. Page 3 for the buttons position of remote control and main unit. Changing the main unit and remote control mode To return to "REMOTE 1" mode Perform steps 1 to 3 but use [1] instead of [2] for steps 2 and 3. ("REMOTE 1" appears on the main unit during step 2. ) The remote control cannot work with the main unit if their modes are different. "REMOTE 1" or "REMOTE 2" appears on the main unit when you operate the remote control. * * If "REMOTE 1" appears (The main unit is in "REMOTE 1" mode. ) Press and hold [ENTER] and [1] on the remote control for at least 2 seconds. If "REMOTE 2" appears (The main unit is in "REMOTE 2" mode. ) Press and hold [ENTER] and [2] on the remote control for at least 2 seconds. To switch to "REMOTE 2" mode Press [FM/AM/MUSIC P. ] to select "AM". (While pressing [FM/AM/MUSIC P. ] on the main unit) Press and hold [2] until "REMOTE 2" appears on the main unit display. Press and hold [ENTER] and [2] for at least 2 seconds. The main unit and remote control are now set to operate in "REMOTE 2" mode. Timer Setting the time This is a 12-hour clock. Press [u, 2] or [i, 1] to select the time within 5 seconds. (Press and hold to change the time faster. ) Press [CLOCK/TIMER] again. g To display the clock when the unit is on Press [CLOCK/TIMER] Play timer You can set the timer to come on at a certain time to wake you up. Preparation: · Turn the unit on and set the clock. · Prepare the music source (disc, radio, iPod or music port) and set the volume. Press [CLOCK/TIMER] repeatedly to select play timer. CLOCK zPLAY Original display Note · The clock is accurate to within ±60 seconds a month. · Set again after disconnecting the AC power supply cord or power failure. "ON TIME" is displayed. Within 5 seconds, press [u, 2] or [i, 1] to set the starting time. Press [CLOCK/TIMER] to confirm. Repeat steps 2 and 3 to set the finishing time. Sleep timer The SLEEP timer can turn the unit off after a set time. [. . . ] This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion-and, most importantly, without affecting your sensitive hearing. We recommend that you avoid prolonged exposure to excessive noise. Over time your hearing "comfort level" adapts to higher volumes of sound. [. . . ]