User manual PANASONIC SA-HT260

[. . . ] Please keep this manual for future reference. The illustrations shown may differ from your unit. Included Installation Instructions The installation should never be done by any other than a qualified installation specialist. Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. You may need them when maintaining or moving this unit. ) If you have any questions contact For U. S. A. [. . . ] Refer to the operating instructions for the TV for details. §2 If the TV has a default speaker setting within the VIERA Link setting items, choosing this unit as the default speaker will automatically change the speaker selection to this unit. TV TV speakers are active. The volume of this unit is set to its minimum. When switching between this unit's speakers and TV speakers, the TV screen may be blank for several seconds. Automatic input switching When the following operations are performed, this unit will automatically turn on§ and change the input channel to the corresponding source. jWhen play starts on an HDMI connected device. jWhen the input channel on the TV is changed. § Only when speaker output is set to this unit. If "Power off link" is activated on the TV, this unit will turn off when the TV is turned off. Automatic lip-sync function (for HDAVI Control 3 or later) Delay between audio and video is automatically adjusted, enabling you to enjoy smooth audio for the picture. The delay information is automatically set if the TV is compatible to VIERA Link "HDAVI Control 3 or later" and the VIERA Link is set to "On". When the delay information cannot be retrieved, the audio delay is set to 40 ms. 14 VIERA Link "HDAVI Control", based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers' equipment that supports HDMI CEC cannot be guaranteed. This unit supports "HDAVI Control 5" function. "HDAVI Control 5" is the newest standard (current as of December, 2009) for Panasonic's HDAVI Control compatible equipment. This standard is compatible with Panasonic's conventional HDAVI equipment. Please refer to individual manuals for other manufacturers' equipment supporting VIERA Link function. Specifications GENERAL Power consumption: Power consumption in standby mode: Approx. When the HDMI connections are changed, after a power failure or after the AC power supply cord has been removed, VIERA Link operations may not function properly. Power No power. Insert the AC power supply cord securely. ( 11) After turning this unit on, if the "TV, BD/DVD" indicator or the " D/DTS" indicator blinks and this unit immediately turns off, unplug the AC power supply cord and consult your dealer. The unit is automatically switched to standby mode. This unit will automatically turn to standby mode after 30 min if it is inactive. ( 11) Power of this unit is turned off when the input for the TV is changed. This is a normal feature when using VIERA Link (HDAVI Control 4 or later). For details please read the operating instructions for the TV. Sound No sound (or image). ( 12) Check the connections to the other devices. ( 10) Check the audio output settings on the connected device. When connected to an ARC compatible TV, check if the TV's connected terminal is ARC compatible. [. . . ] jThe position in the wall where the screw is to be attached should be capable of supporting over 20 kg (44. 1 lbs). 24 Attaching this unit to a wall 6 Thread a cord (not supplied) through the wall mount bracket. Use a cord which is capable of supporting over 20 kg (44. 1 lbs). A Rear of this unit B Fall prevention cord (not supplied) 7 Attach the lock pins into the wall mount bracket. The lock pins are designed to lock the wall mount brackets to the screws that this unit is attached to. Hence, preventing this unit from falling off the screws. Keep the lock pins out of reach of children to prevent swallowing. Insert the lock pins as illustrated in the image below. [. . . ]