User manual PANASONIC SA-PM71

[. . . ] Operating Instructions SD Stereo System Model No. SC-PM71SD As an ENERGY STAR® n High speed recording -- Performance and Partner, Panasonic has convenience! page 24 determined that this product meets the ENERGY STAR® n More fun with SD -- Connect and expand!guidelines for energy page 36 efficiency. n n Never forget a recording again with the "Record timer". page 33 Save your favorite tracks from an external source to SD! [. . . ] 2 (Normal recording only) + While pressing [*/h REC], press [TAPE] to start recording. Recording from the radio (Normal recording only) 1 Tune to the station ( page 22). 2 While pressing [*/h REC], + press [TAPE] to start recording. Program recording (Normal recording only) Program record allows you to specify the tracks to be recorded to tape. 1 Select "SD" as the source. ( page 17, Program play, steps 1 to 3) 3 + While pressing [*/h REC], press [TAPE] to start recording. To stop Press [g STOP]. To pause (recording from the radio) While pressing [*/h REC], press [TAPE]. The cassette tape pauses and the radio continues playing. ("REC" flashes on the display. ) Press again to restart recording. Note Note You can use SD cards with capacities between 8MB and 1GB on this unit. ( page 6) · Recording automatically stops when the end of the side of the tape being recorded to is reached. To record the other side, turn the tape over. · When recording an AM broadcast, sound is momentarily interrupted when you start and stop the recording. · You cannot select RANDOM mode when recording. RQT8046 Recording 27 Editing SDs Preparation 1 Insert the SD card. ( page 8) · Securely close the lid of the SD card slot. 2 Press [q/h SD] and then [g STOP] to select "SD" as the source. Erasing tracks -- TRACK ERASE/ALL ERASE TRACK ERASE 1 During stop or play Select "TRACK ERASE?". Every time you press the button: 2 Press [LIST/ENTER]. 3 Press [u 2/REW, i 1/FF] to select the track to erase and press [LIST/ENTER]. 4 Press [LIST/ENTER]. Editing ALL ERASE · Repeat this step to select other tracks (up to 24 tracks). · During play, the current track is selected. When "CARD Writing" stops flashing editing is complete. All the SD-Audio tracks on the card are erased. 1 During stop Select "ALL ERASE?". Every time you press the button: 2 Press [LIST/ENTER]. 3 Press [LIST/ENTER]. · When "CARD Writing" stops flashing editing is complete. · If you erase all the tracks, "NO TRACK" is displayed. · Editing SDs may take time when erasing a lot of tracks at one time or when erasing tracks in multiple playlists. Moving tracks -- MOVE 1 During stop or play Select "MOVE?". To stop partway Press [g STOP]. Note Every time you press the button: · Do not open the SD card lid while editing as the operation in progress stops and the editing is not completed properly. If you accidentally open the cover when editing an SD card, reinsert the card and check what you have edited. If there is a problem, delete what was edited, then do the editing again. · You can use SD cards with capacities between 8MB and 1GB on this unit. 3 Press [u 2/REW, i 1/FF] to select the track to be moved and press [LIST/ENTER]. During play, the current track is selected. 4 Press [u 2/REW, i 1/FF] to select the new 5 Press [LIST/ENTER]. position and press [LIST/ENTER]. When "CARD Writing" stops flashing editing is complete. 28 RQT8046 Formatting a card -- CARD FORMAT Formatting erases all the contents of the card and not only the tracks recorded using this unit. [. . . ] 120 seconds with C-60 cassette tape n GENERAL Power supply Power consumption Dimensions (WxHxD) Mass AC 120 V, 60 Hz 141 W 175 mm x 249. 5 mm x 379. 6 mm (6 29/32" x 9 27/32" x 14 31/32") 5. 8 kg (12. 8 lbs) Approx. 0. 3 W Reference Power consumption in standby mode Note n CD SECTION Disc Sampling frequency CD MP3/WMA Bit rate MP3 WMA Decoding Pickup Beam source Wavelength Number of channels Frequency response Wow and flutter Digital filter D/A converter CD, MP3, WMA, CD-R/RW, and HighMAT 8 cm/12 cm 44. 1 kHz 32 kHz, 44. 1 kHz, 48 kHz 32 kbps to 320 kbps 40 kbps to 192 kbps 16 bit linear Semiconductor laser 780 nm Stereo 20 Hz to 20 kHz (+1, -2 dB) Below measurable limit 8 fs MASH (1 bit DAC) 1. Specifications are subject to change without notice. Total harmonic distortion is measured by digital spectrum analyzer. 42 RQT8046 · SD logo is a trademark. · Microsoft, Microsoft logo, Windows, Windows logo, Windows NT, Windows Media and DirectX are either trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. [. . . ]