User manual PANASONIC SA-RT50

[. . . ] Operating Instructions Operations Guide Before using this product, perform setup and connections after carefully reading the Setup Guide. Recordable DVD Home Theater System Model No. Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. If you have any questions contact 1-800-211-PANA(7262) The warranty can be found on page 51. Region number supported by this unit Region numbers are allocated to DVD players and software according to where they are sold. [. . . ] You cannot record and play simultaneously. If the DV camcorder recording function does not work properly, check the connections and DV equipment settings, and turn the unit off and back on. If that does not work, follow the instructions for manual recording ( below). e. g. : Connecting other video equipment to the IN2 or DV IN terminals You can also connect to the IN1 input terminals on the rear. Turn off the unit and other video equipment before connecting. This unit Yellow White Red or DV cable (IEEE 1394, 4-pin) Other video equipment Connect to Audio/video output terminals. S Video cable* Audio/video cable Manual recording [RAM] [-R] [-R]DL] [-RW<V>] [+R] [+R]DL] [+RW] [Note] When recording using this unit's input terminals, only the sound received at the time of recording will be recorded. As long as the secondary audio that is recorded on the video cassette is not output on the unit in play, it is not recorded. If the audio output of the other equipment is monaural Connect to L/MONO on the IN2 input terminals at the front. * The S VIDEO terminal achieves a more vivid picture than the VIDEO terminal. See also the notes "Important notes for recording"( page 10) Preparation Turn on the unit and connected equipment. Press [THEATER] to switch the remote control to operate this unit. Press [DRIVE SELECT] to select the DVD drive. Press [REC MODE] to select the recording time. To reduce noise in input from the video cassette recorder, set "Line-in NR" to "On" ( page 21). When recording from the unit's DV IN terminal Select the type of audio recording from "Select Audio Channel For DV Input" in the Setup menu ( page 39). When recording from DV equipment (e. g. , digital video camcorder), you can record audio/video recordings from DV tape only. 1 While stopped Press [INPUT] to select the input channel for the equipment you have connected. e. g. , If you have connected to IN2 input terminals, select "IN2". 2 3 Start play on the other equipment. When you want to start recording Press [ REC]. Recording starts. Using Flexible Recording ( page 13), you can record the content of a video cassette (approx. 1­8 hours) to a 4. 7 GB disc with the best possible quality of recording without wasting disc space. To skip unwanted parts Press [ ] to pause recording. (Press again to restart recording. ) To stop recording Press [ ]. Almost all videos and DVD software on sale have been treated to prevent illegal copying. Any software that has been so treated cannot be recorded using this unit. DV camcorder recording (DV Camcorder Rec. ) [RAM] [-R] [-RW<V>] [+R] [+RW] [RAM] Programs are recorded as a title while at the same time chapters are created at each break in the images and the playlist is created automatically. When "DV camcorder connection" screen is displayed DV camcorder connection Press [ , ] to select DV connection detected. "Record to DVD" and Start recording ?Record to DVD Cancel You can proceed to step 4. ENTER RQT8655 30 Entering text Refer to the control reference on page 30. [. . . ] If non-rechargeable batteries are included, they are not warranted. This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold "as is". A purchase receipt or other proof of the original purchase date is required for warranty service. Customer Services Directory Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www. panasonic. com/consumersupport or, contact us via the web at: http://www. panasonic. com/contactinfo You may also contact us directly at: 1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST. For hearing or speech impaired TTY users, TTY : 1-877-833-8855 Accessory Purchases Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www. pasc. panasonic. com or, send your request by E-mail to: npcparts@us. panasonic. com You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday ­ Friday 9 am to 8 pm, EST. ) Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032 (We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks) For hearing or speech impaired TTY users, TTY : 1-866-605-1277 Service in Puerto Rico Panasonic Puerto Rico, Inc. [. . . ]