User manual PANASONIC SA-XR55P

[. . . ] Operating Instructions Model No. SA-XR55 Dear customer Thank you for purchasing this product. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference. Table of contents Before use IMPORTANT SAFETY INSTRUCTIONS. 3 For Canada only: The word "Participant" is used in place of the word "Partner" 2. [. . . ] (ápage 12) n PCM signal CD, DVD-Audio etc. This unit's DIGITAL IN COAXIAL1 terminal can play up to 192 kHz and the other DIGITAL IN terminals can play up to 96 kHz. For your reference When playing video sources connected to DVD RECORDER. The picture remains on the screen even if you select "TUNER ", "CD " or "TAPE ". n It cannot decode · Other digital signals, such as MPEG · Dolby Digital RF signals from a laser disc player RQT7994 Reference 15 Operations When the digital input S indicator lights with Dolby Digital 2-channel and DTS 2-channel sources, you can only use "CINEMA " mode. When it does not light, you can only use "MUSIC " mode. (ápage 16 "Display indicators") Basic Operations n After pressing [MUSIC] or [AV/MOVIE], the mode changes even if Settings Best suited for action movies with impact. Connections Select. MOVIE: Use this mode when playing movies. MUSIC: Use this mode when playing music. GAME: Enjoy games with greater audio impact. Imparts the reflection and spread of a large concert hall. POP/ROCK: Best suited for dynamic sound such as Before use Control guide Main unit [8, POWER] Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. [SPEAKERS, A, B] For selecting speakers A or B. Turning the speakers off automatically engages the STEREO/2CH MIX mode (when listening through headphones, for example). [MULTI CONTROL, CANCEL] Press to enter Multi control or cancel. [VOLUME] Volume control. [ENTER] Enters setting in Multi control. Standby indicator [^] When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on. [INPUT SELECTOR] For selecting input. Selects each setting in Multi control. Before use INPUT SELECTOR POWER SPEAKERS A B DUAL AMP BI-AMP BAND PRESET TUNE VOLUME MULTI CONTROL ENTER CANCEL Connections DOWN UP PHONES VCR 2 VIDEO IN L AUDIO IN R Remote control signal sensor [VCR 2] For a game player, etc. [DUAL AMP] Lights when the DUAL AMP function is activated. [BAND] For switching between FM and AM. [PHONES] Headphone jack. Plug type: 6. 3 mm (1/4") stereo Avoid listening for prolonged periods of time to prevent hearing damage. Turn the speakers off when using the headphones. [PRESET] Press to allow preset station selection with [2 TUNE 1]. [BI-AMP] Lights when the BIAMP function is activated. [2 TUNE 1] Settings For tuning the radio and selecting preset stations. Press and hold until the frequency starts scrolling to start automatic tuning. Tuning stops when a station is found. Display indicators [RE-MASTER] Lights when the multi-source re-master function is on. [TUNED] A station is tuned. [DIGITAL INPUT] · The channels contained in the digital input signal light. · No sound is output from a channel if the speaker is set to "_" (not connected) in "Speakers combination settings" (ápage 12) even if the channel indicator lights. L: Front left channel C: Center channel R: Front right channel LS: Surround left channel SB: Surround back channel RS: Surround right channel S: If the surround channel is monaural LFE (Low Frequency Effects): Deep-bass effect [ST] A stereo FM broadcast is tuned. Basic Operations [MULTI CONTROL] When you press the [MULTI CONTROL, CANCEL] button and enter the settings the indicator lights. [MONO] Lights when using the monaural mode. [SLEEP] Sleep timer indicator. RE-MASTER [M] Flashes during presetting. automatic [PCM] Lights when the PCM FIX mode is set. DIGITAL INPUT 2CH MIX LS SB kHz PCM S MHz L C R RS LFE TUNED ST MONO M SOUND MODE DIGITAL EX DTS - ES DTS 96/24 EX NEO:6 SFC PL x STEREO MULTI CONTROL Operations SLEEP SPEAKERS A B BI-WIRE [­ SPEAKERS ­ A , B , BI-WIRE ] Reference Speaker indicators. A: Sound is output from speakers connected to the front A, surround, and center terminals. B: Sound is output only from speakers connected to the front B terminals. A, B: Sound is output from speakers connected to the front A, B, surround, and center terminals. A, B, BI-WIRE: Sound is output from speakers connected by Bi-wiring. General display Shows the input mode, radio frequency, and other general information. [2CH MIX] Lights when playing a multi-channel source in 2CH MIX mode. [SOUND MODE] The following light to indicate the source's input signal (multichannel digital signal) and the decoding format used. (ábelow) [kHz, MHz] Frequency unit indicators. kHz: AM, or PCM sampling frequency MHz: FM SOUND MODE DIGITAL: DIGITAL EX: EX: DTS-ES: DTS: DTS 96/24: STEREO: · · Dolby Digital decoder is being used. [. . . ] However when you play a Dolby Digital or DTS 2-channel source in stereo, only the LFE (low frequency effects channel) signal from the source is output from the subwoofer. · Ensure the speaker settings for your speakers are correct. · Turn Dolby Pro Logic , DTS NEO:6 or SFC on. · You cannot use Dolby Pro Logic , DTS NEO:6 or SFC when input is PCM with sampling frequencies of 192 or 176. 4 (COAXIAL1). [. . . ]