User manual PANASONIC SB-AK95

[. . . ] Keep these operating instructions handy for future reference. 5) Do not use this apparatus near water. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. [. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Preparations · Make sure that all equipment has been turned off. (When the VIERA Link "HDAVI Control" compatible Panasonic TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) are connected, do not turn on TV (VIERA) and Blu-ray Disc player/DVD recorder (DIGA) until the setting is complete. ) · Connect AC power supply of main unit (SC-ZT2) and 4 speakers to household main sockets. ( page 12 of SC-ZT2 Operating Instructions and left page of this manual) · Make sure that the main unit (SC-ZT2) and speakers have been turned off. · Prepare the remote control (SC-ZT2). ( page 7 of SC-ZT2 Operating Instructions) 1. · The color of the [WIRELESS LINK] indicator of the front speakers changes from red to green. · Do not turn on the surround speakers yet at this point. The color of the [WIRELESS LINK] indicator does not change from red to green even if the power is turned on. Set "4CH " at the setting operation of "Changing the number of speakers to 4". ( page 15 of SC-ZT2 Operating Instructions) 4. 0. 8 W (per 1 speaker) In Standby condition: approx. 0. 1 W (per 1 speaker) TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, * DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. * DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: CAUTION! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. The unit should be installed near an accessible AC power outlet, with the power cord connected directly to it. To completely disconnect power from the unit, unplug the power cord from the AC power outlet. CAUTION! Maintenance Unplug the AC power supply cord from the household AC outlet and wipe the system using a soft and dry cloth. · When the system is very dirty, wring the cloth soaked in water thoroughly, wipe the dirt and wipe moisture off with a dry cloth. · Do not use solvents such as benzine, thinner, alcohol, etc. because they may cause casing to deform and coating to come off. · Before using chemically treated cloth, read the instructions that come with the cloth carefully. Do not place anything on top of this unit or block the heat radiation vents in any way. In particular, do not place DVD recorder or CD/ DVD players on this unit as heat radiated from it can damage your software. 3 VQT2T88 Speaker setting/Maintenance Specifications g POWER AMPLIFIER SECTION RMS output power 10 % total harmonic distortion Woofer Speaker ch 60 W (100 Hz, 3 ) Mid High Speaker ch 20 W (1 kHz, 8 ) System Total Power2 160 W (80 W x 2) FTC output power 1. 0 % total harmonic distortion 50 Hz to 250 Hz Woofer Speaker ch 37 W (3 ) 250 Hz to 20 kHz Mid High Speaker ch 13 W (8 ) 100 W (50 W x 2) System Total Power2 g SPEAKER SECTION1 2-way 5 speakers system (Bass reflex type) Woofer part 12 cm cone type x 1 Mid High part 2. 4 x 10 cm flat type x 4 g SPEAKER GENERAL1 Power supply AC 120 V, 60 Hz Power consumption 20 W Wireless Link Standby 0. 8 W In Standby condition 0. 1 W Dimensions ( W x H x D ) 290 mm x 1231 mm x 290 mm (11-13/32" x 48-15/32" x 11-13/32") Approx. [. . . ] · Do not hold the speaker with one hand. · Before attaching the leg cushion on the base parts of speakers to prevent tilt or rattle on the floor, make sure there are no people in the surrounding area. · Do not insert your hand or foot into the opening of side surface of base part. · Do not turn on the speakers with foot or vacuum cleaner carelessly. [. . . ]