User manual PANASONIC SB-CSS90

[. . . ] These are the optional speakers for the SC-HDV600 DVD Stereo System. System Center speaker x 1 Surround speaker x 2 SB-CSS90 SB-PC96 SB-PS96 Speaker set-up Front speaker (Left) Center speaker (SB-PC96) TV Amplifier (SE-HDV600) Front speaker (Right) Surround speaker (Right)(SB-PS96) Surround speaker (Left)(SB-PS96) Location The front, center, and surround speakers should be placed at approximately the same distance from the listening position. The angles in the diagram are approximate. Peripheral equipment and parts are not included unless otherwise indicated. Positioning for best effect How you set up your speakers can affect the bass and the sound field. [. . . ] The angles in the diagram are approximate. Peripheral equipment and parts are not included unless otherwise indicated. Positioning for best effect How you set up your speakers can affect the bass and the sound field. ·Place speakers on flat, secure bases. ·Placing speakers too close to floors, walls, and corners can result in excessive bass. ·Cover walls and windows with thick curtain. ·Place the surround speakers on the side of or slightly behind the seating position, about one meter higher than ear level. ·Vibration may cause distortion in the picture if the center speaker is placed directly on the television. ·Place the center speaker at least 5 cm from the wall as it has a bass reflex port in the rear. If equipment is damaged in any way or unexpected trouble occurs during playback, unplug the system from its outlet and call a serviceman for help. Keep magnetized items away Magnetized cards, bank cards, commuter passes, etc. , can be damaged if allowed too near speaker magnets. Clocks may also be affected. Notes on speaker use You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods. Reduce the volume in the following cases to avoid damage ·When playing distorted sound. ·When the speakers are receiving howling from a microphone or record player, noise from FM broadcasts, or continuous signals from an oscillator, test disc, or electronic instrument. ·When adjusting the sound quality. ·When turning the amplifier on or off. Avoid locations such as described below. ·In direct sunlight ·Near heating appliances or other sources of heat ·Where the humidity is high 3 RQT6003 Maintenance To clean these units, wipe with a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth dipped in a soap-and-water solution or a weak detergent solution. ·Never use alcohol, paint thinner, or benzine to clean these units. [. . . ] ·When adjusting the sound quality. ·When turning the amplifier on or off. Avoid locations such as described below. ·In direct sunlight ·Near heating appliances or other sources of heat ·Where the humidity is high 3 RQT6003 Maintenance To clean these units, wipe with a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth dipped in a soap-and-water solution or a weak detergent solution. ·Never use alcohol, paint thinner, or benzine to clean these units. [. . . ]