User manual PANASONIC SB-R1-E

[. . . ] Each day the discovery of a truly emotive experience from an unencountered sound awaits. Let us take you on your journey to rediscover music. Book 4 ページ ２０１５年１月２３日　金曜日　午後４時４３分 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. [. . . ] Book 8 ページ ２０１５年１月２３日　金曜日　午後４時４３分 About the spacers and spikes ≥ Keep the spikes out of reach of children to prevent swallowing. ˆ Attaching the spacers Place the speakers on a surface that will not be damaged, such as a carpeted floor, or on a surface that you do not mind damaging. ‰ If the speakers wobble, place the spacers under the metal feet. This will prevent the metal feet from wobbling on the speaker locations. Metal foot Metal foot Spacer Metal foot ∫ Attaching the spikes The spikes may enhance the audio quality. ‰ Panasonic is not responsible for any accidents or damage caused by improper assembly or handling of the product. Do not attach the accessories in any other way than instructed in this Owner’s Manual. ≥ Each speaker has a mass of approximately 72 kg (159 lbs). When tilting the speakers to attach the spikes, ensure that the work is done by at least two people. When attaching the spikes, exercise caution to avoid catching your fingers or toes between the speakers and floor or tipping the speakers over. In addition, ensure that you spread a thick mat or similar item on the side of the floor where you will be tilting the speakers to prevent damage to the floor. ‰ Since each spike supports a mass of at least approximately 18 kg (39. 68 lbs), the spikes may leave marks and indentations on the installation location. To prevent the spikes from damaging the area, use the supplied spike shoes or purchase spike shoes with large contact surfaces and adequate strength. ‰ Moving the speakers with the spikes attached may cause damage to the floor. Before changing the installation location, remove the spikes. 8 (8) SB-R1_SQT0465_PPCEBEGGN_mst. Book 9 ページ ２０１５年１月２３日　金曜日　午後４時４３分 1 Tilt the speaker backwards, and screw the spikes into the screw holes on the front metal feet. When using the spike shoes, place them under the spikes. Place each spike shoe so that the side with an indented centre faces up. DO DO NOT Spike shoes 2 While aligning the tips of the spikes with the indentations on the spike shoes, slowly bring the speaker back to the upright position. 3 In the same way as Step 1, tilt the speaker forward and screw the spikes into the screw holes on the rear metal feet. [. . . ] When shipping Lithium Ion batteries please visit our Web Site at www. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. For all your Technics gear Go to www. Com/accessories Get everything you need to get the most out of your Technics products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, BaƩeries, Backup Chargers & more… Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. [. . . ]