User manual PANASONIC SC-NA10

[. . . ] SC-NA30_10EB_VQT5C39_eng. book 1 ページ ２０１３年８月７日　水曜日　午前１１時４６分 Operating Instructions Wireless Speaker System Model No. SC-NA30 SC-NA10 SC-NA30 SC-NA10 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Model number suffix “EB” denotes UK model. EB EG GN GS VQT5C51 until 2013/08/19 SC-NA30_10EB_VQT5C39_eng. book 2 ページ ２０１３年８月７日　水曜日　午前１１時４６分 Caution for AC Mains Lead (For the AC mains plug of three pins) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. [. . . ] • Stop / disable the Bluetooth® transmission of the device. • (For NFC-compatible devices only) Touch and hold your device to NFC touch area of this unit again. Note • This unit can only be connected to one device at a time. • This unit can register up to 8 devices. When the number of registered devices exceeds the maximum limit, a device that has not made a Bluetooth® connection for the longest time will be replaced. This will cancel the registration of the device. To use the device again, re-register it. • If the unit connected to the AC adaptor is selected from a Bluetooth® device, the unit will turn on automatically even when it is turned off, establishing a Bluetooth® connection. • If the image and sound are out of sync during playback, restart the playback app you are using. If the problem persists, connect the Bluetooth® device and this unit with an audio cable (commercially-available). • The One-Touch Connection may not work properly depending on the type of device being used. • Depending on the specifications and settings of a device, it can fail to connect or some operations can be different. • Refer to the operating instructions of the Bluetooth® device for details. 12 VQT5C51 SC-NA30_10EB_VQT5C39_eng. book 13 ページ ２０１３年８月７日　水曜日　午前１１時４６分 Using LP mode This mode minimises power consumption of the battery by lowering the speaker output. ( 8) Press and hold [LP] for 2 seconds or more until the LP mode indicator (green) lights up. The LP mode is enabled. • Press and hold [LP] for 2 seconds or more again will return the setting back to the normal mode. Note • Even when the AC adaptor is connected, LP mode remains enabled. • In LP mode, even when the volume knob is adjusted, the volume of the unit may not increase. • Turning off the LP mode may cause the volume to jump up suddenly. Before turning off the LP mode, lower the volume. Using the AUX input You can listen to audio via the AUX IN jack ( 6, 7) when this unit is connected to a device with an audio cable (commercially-available). Note • When using the AUX input, AUX input has priority than the Bluetooth® features and NFC features. (It will be possible to receive a call hands-free by pressing [ ] when there is a call coming in on the device connected with Bluetooth®. 14) ® is not changed even if the audio cable (commercially-available) • The setting of the Bluetooth is inserted into AUX IN jack. • When using the AUX input, the volume may seem low depending on the connected device. In that case, check if the volume limit can be changed on the device. [. . . ] To claim warranty service, when required, you should: • Telephone Panasonic’s Customer Care Centre on 132600 or visit our website referred to below and use the Service Centre Locator for the name/address of the nearest Authorised Service Centre. • Send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of purchase date. Please note that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged by you. • Note that home or pick-up/delivery service is available for the following products in the major metropolitan areas of Australia or the normal operating areas of the nearest Authorised Service Centres: Plasma/LCD televisions / displays (screen size greater than 103 cm) 7. [. . . ]